Brunton Shaw UK offers a full range of rigging services, allowing us to satisfy our customers’ needs for end fitting of ropes with a variety of hardware and specialist splices. Here below we can demonstrate some of the services which we provide to our customers from our Worksop factory.

Solutions provider for Cable Management and Asset Management, including

bespoke projects and patented RFID Technology products

CABLE Track units can vastly reduce installation times and cut costs.

Attachable by magnet, cable tie or bolt.

Visual and RFID tagging solutions including ATEX to ensure H&S Compliance

of your equipment.

For further information contact Nigel Myers on 01423611610

or visit www.cabletrail.com

Whilst our website features our key products and services, we are continually expanding our product offering to meet changing market needs. Our design, custom manufacturing and installation services also enable us to deliver wider ranging solutions than could be captured there.

For further information contact Sam Hudson on +44 (0)8452 778800 or visit www.dockguard.com

DSG are UK and overseas specialists in HV and LV cable jointing & testing. We have qualified and authorised staff to work on DNO, IDNO and private networks on all voltages from LV up to 132kv on UKPN, SSE and WPD Networks. They also have leading manufacturers qualifications such as Pfisterers, 3M, TE connectivity & ABB up to 400kv to name but a few. 

DSG can provide civils and engineering solutions to ensure customer requirements can be met for all projects undertaken on electrical installations, testing, excavations and re-instatement.

For further information contact James Morgan on 0800 038 7773 or visit www.ds-groupltd.com

 Welcome to J.D. Neuhaus, the world's leading manufacturer of pneumatic and hydraulic hoists, crane systems and system solutions. Our products are engineered for extremes. 

For further information contact Steve Walker on 01384 353100 details visit www.jdngroup.com

Jetrac®

Our engineers are able to conduct varying levels of onboard surveys to establish baseline information, this will determine the material state for every Flexible Hose Assembly (FHA) onboard a particular vessel or asset.  The main benefit is to highlight damaged assemblies eliminating any potential risk to personnel, production and environment in the event of hose failure.   

This service-critical data is stored and accessed through our Jetrac® system which is a web accessible database ensuring an accurate and up-to-date record of all Flexible Hose Assemblies. 

Having a Flexible Hose Asset Management System in place provides accurate data to plan maintenance and ensure equipment can work to its maximum capacity.  It can also be used to filter for any FHA’s due for change out in accordance with the customers’ requirements.

Approved and accredited by the British Fluid Power Association (BFPA), our engineers can manufacture and test a wide variety of hoses to meet specific customer requirements.  We hold / manufacture hoses to Defstan 47-32 for UK MOD and can also manufacture and supply a wide range for commercial use.  Please see below for the range we can offer:

• 1WB and 2WB, 4SP, 4SH, R13 and R15 (braid & multi spiral range), PTFE Hoses,     Stainless Steel hoses and Thermoplastic hoses.
• Bore size 3/16” to 2” as standard but we can also accommodate any specific customer requirements.  For eachhose that we manufacture we can also provide a full technical drawing. 

All hoses are pressure tested at our facility to the required pressures for the hose application, we can also offer mobile testing anywhere onsite at customer locations / facilities.  All our surveyors are competent hose manufacturers and fitters and can carry out a variety of installation/change out projects.  

For further information contact Sara Blake on 01243 956992 or Lee Greenfield on 01243 956991 or visit www.jetrac.co.uk

MC Engineering Services are specialists in the manufacture, repair, thorough examination and testing of lifting, lashing and mooring equipment as well as being suppliers and manufacturers of cable working gear.

For further information contact Paul Hawkins on 01489 878769 or visit www.mcengineeringservices.com

MGL Cable Services is a cabling focused electrical engineering company based in the North East of England.

Part of the MGL Group of Companies, we have the expertise to fulfil the full scope of a large project or deliver a single service as part of a smaller scope within a large project.

Our processes and procedures enable us to deliver consistent outcomes and we share our knowledge and lessons learned with clients and delivery partners.

MGL Cable Services work to high quality standards embodied within our SHEQ management systems, endorsing our Zero Harm policy to provide every client with complete peace of mind.

We ensure that customer service and satisfaction are our priority and as a service provider, we work closely with the client to ensure the smooth delivery of services and projects, to specification, on time, and on budget.

Specific expertise includes 

·      High Voltage Cable Jointing up to 400kV

·      High Voltage Cable Testing

·      Fibre Optic Cable Splicing 

·      Fibre Optic Cable Testing

·      Offshore Termination & Testing

·      Project Management

·      Project Support 

·      QA/QC Representatives

·      Technical Documentation 

·      Drafting,

·      Client Witnessing

·      Civil Construction and Plant

·     High Voltage Cable Fitters and Specialist Engineering Consultancy.

For further information contact Geoff Briggs on 0191 383 9900 or visit www.mglgroup.co.uk

New distributor for Techflow Marine products & new autonomous shutdown agreement

Offspring International Limited (OIL)is a leading supplier of single point and Deepwater mooring systems, offloading hoses, marine breakaway couplings, engineered ropes and navigational moorings.

Based in Dudley near Birmingham, UK, and with a subsidiary office in Laguna Hills, California, OIL is a dedicated team of mooring professionals, bringing over 100 years’ experience in offshore mooring lines and systems. OIL staff are active members of the Oil Companies International Marine Forum (OCIMF) where it has contributed to Single Point Mooring best practice. OIL is also represented on many of the oil andgas industry’s joint industry projects’ (JIPs) Deepwater mooring committees.

OIL supplies a range of SPM and tandem offtake mooring systemsfollowing the OCIMF 2007 “Recommendations for Equipment Employed in the Bow Mooring of Conventional Tankers at Single Point Moorings”, including single or dual hawser configuration, single leg-type mooring hawser and grommet-type mooring hawser manufactured and supplied in strict accordance with the OCIMF 2000 ‘Guidelines for the Purchasing and Testing of SPM Hawsers’.

All OIL SPM systems and products offer outstanding operational performance, reliability and safety, and include chafe chains, mooring hawsers, pick-up and messenger ropes, support buoys, shackles, associated fittings and load-monitoring equipment.

OIL is also the exclusive worldwide agent for Lankhorst Ropes Offshore Division (part of WireCo WorldGroup), and is the international agent for MIB Italiana’s MIBreak marine breakaway couplings and EMSTEC GmbH offloading hoses

For further information contact Peter Rowley on +44 (0)1384 453880 or visit www.offspringinternational.com

SADS have worked all over the country and overseas in a safe and professional manner. SADS are registered with the HSE as a diving contractor and is also a founding member of the association of Diving Contractors (now ADC).  Anthony the company managing director was the first supervisor registered with the ADC and has always insisted on running the company and the company projects in the safest way possible. Due to his efforts and no compromise attitude to safety SADS have received a number of safety awards and glowing references from clients and partner companies over the years and continue to do so.  Sub Aqua Diving Services (UK) Ltd have solutions to all sub-sea endeavours for all companies, be it renewable energy (offshore wind farms) or marine civil engineering. Our company has over 35 years’ experience in the commercial diving industry and are ready to undertake your sub-sea requirements. SADS have been involved with the installation of offshore wind farms since 2002. North Hoyle, Barrow in Furness, Blyth, Lynn and inner Dowsing and Robin Rigg have all had SADS involvement with the provision of diving support. Whether it be cable installations, cable surveys, inspections, surveys, belly clamp installations, scour protection or consultants we are proud to say we have done it all.

Wartsila services UK have the widest offering in the market whichcovers installations from spare parts, maintenance and technical support to upgrade & retrofit and full service agreements for the marine, offshore and industrial markets.

Wartsila Engine services provide complete engine related system services, covering both Wärtsilä and other engine makes in house or on site with a qualified team of engineers ready to be deployed, covering all requirements on land, in port and at sea. Both Aberdeen and Segensworth workshops have fuel injection facilities that can offer service and overhaul on all types of fuel injectors and fuel pumps

Wärtsilä Automation Services in Montrose are equipped to offer a complete electrical package including conceptual design, engineering, assembly, installation and commissioning of retrofit systems and fully recognise the importance of on-site support and application engineering.  Wartsila Automation are also proud to be the Authorised Service Centre and Agent for Basler Electric Company who are world leaders in power control and protection. Basler trained commissioning engineers are available to troubleshoot and commission AVR systems.Wärtsilä Propulsion Services UK, range from in-situ machining, straightening propeller shafts and rudder stocks, repair, retrofit and rebuilding as well as environmental solutions for metallurgical repairs of both propellers and shaft seals. Work is carried out in the fully equipped repair facility in Glasgow or on site anywhere in the world. Wartsila propulsion UK have a full team of highly qualified and professional service engineers who attend dry dockings to supervise and carry out hub overhauls, thrusters repairs and control set ups.

Our service businesses support all customers throughout the lifecycle of their installation.