Email : firstname.lastname@example.org
Phone : +44(0)3458 247365
Website : www.aggreko.co.uk
Aggreko works with port authorities across the globe to provide rental power generation and temperature control services. These help to support customers whilst assets are laying idle, so they can be quickly re-mobilised when the time comes.
1. Environmental control equipment to preserve assets
Whilst vessels are laid up, it is important for on-board assets to be kept in optimum condition, so they can be redeployed in future without excessive cost.
Aggreko can install temporary on-board temperature control equipment to prevent corrosion, condensation and freezing, caused by unwanted moisture and salt from coastal conditions.
Using a variety of heating and dehumidification equipment, the temperature and humidity of internal air spaces can be controlled. This ensures void spaces within machinery and pipelines remain dry and prevents corrosion damage and moisture absorption into electrical cables and fittings.
By creating a stable environment, our rental equipment ensures assets, such as the engine room, bridge and sensitive electronic equipment, remain in peak condition, no matter how long it takes before they are recommissioned.
2. Cost effective power
Whether hot or cold stacked, vessels will require some degree of power for tasks such as routine regular maintenance, or heating and lighting for crew. By using temporary dock side rental generators, customers can shut down their main engines or existing oversized emergency generators and improve operational and cost efficiency. As we undertake the refuelling, servicing and maintenance of our generators, customers can save additional money and manpower too.
There is a growing demand for dockyards to consider using low carbon emissions power. In such cases, gas generators can be a viable option.
3. Equipment testing prior to redeployment
If market conditions pick up, a re-mobilisation plan will be needed. As part of this process all power supplies and HVAC equipment should be load tested to ensure it functions properly when returned to full working order. The Aggreko team is experienced at providing this capability to load test the main generators, emergency generators, and any cooling systems on the vessel.
Rental solutions offer three main benefits:
Flexibility: Rental equipment can be scaled up or down with very short lead times to supply variable demands.
Wide range of equipment: Renting equipment offers the ability to change equipment, dependent on ambient temperatures or on-board power requirements.
End to end solution: Aggreko provides a complete service, from site survey, through to installation, continuous maintenance, refuelling and extraction.
If you wish to talk to us about requirements, please contact us on +44 (0)3458 24 7 365 or email email@example.com
Email : firstname.lastname@example.org
Phone : +44 1452 723 492
Website : www.betamarine.co.uk
Beta Marine produce a range of inboard diesel engines from 10 to 150 hp. Heat Exchanger, Keel or Radiator cooled, they are robust, reliable smooth engines used in a variety of applications from pleasure boats to workboats and fishing vessels.
Beta Marine also produce a range of marine auxiliary generator sets up to 1150kVA.
For Further Information Contact Andrew on +44(0)1452 723 492 or visit www.betamarine.co.uk
Email : email@example.com
Phone : +44 (0)1792 897002
Website : www.cpengineering.co.uk
C&P Engineering Services Ltd is a specialst Electrical and Instrumentation Services company that has a reputation of minimising risk through safe, professional and versatile high quailty Electrical and Instrumentation Services.
We have built up a reputation in a wide range of industries namely the Chemical, Petrochemical, Oil & Gas, Steel, Power Generation, Pharmaceutical, Nuclear & Renewable Energy industries. The vast majority of our Electrical and Instrumentation Services are carried out on COMAH sites and typically hazardous areas workplaces/environments that may contain or have activites that produce, explosives or potentially explosive atmospheres which can be caused by flammable gases, mists or vapours or by combustible dusts.
Over the last 40 years we have continually developed and improved our knowledge base and operational systems to the point where we are now recognised as one of the UK's leading International Electrical and Instrumentation Services Contractors.
• Control and Instrumentation, Design & Engineering
• Low Voltage Electrical, Design & Engineering
• Hazardous Area ATEX Inspectors, Design & Engineering & Consultancy
• Safety Instrumented System, Design & Engineering - IEC 61508, IEC 61511
• Functional Safety Management Consultancy
• High Voltage Services, Design & Engineering - 11kV, 33kV, 132kV
• Project Managment - Principal Contractor
• CompEX Electrical Training Services
For further information contact David Demock MIET on +44 (0)1792 897002 or visit www.cpengineering.co.uk
Email : firstname.lastname@example.org
Phone : +44 (0)161 484 2600
Website : www.netcontrol.com
Netcontrol is an international company in the energy network automation industry.
Our secure, connected solutions are daily helping hundreds of power utilities and energy operators to implement and operate intelligent grids that cut both costs and carbon use and deliver critical resilience in a world where security and quality of supply is becoming ever more essential and ever harder to maintain.
Our products include substation gateway controllers, SCADA systems for control centres, RTUs, motor actuators, recloser and switch controllers, data radio devices and network solutions based on IP technology. All are designed for retrofit as well as for new installations, and all integrate perfectly with products from a wide range of other manufacturers. Network automation is all we do.
Email : email@example.com
Phone : +44 (0)1908 210 210
Website : www.scania.co.uk
Scania is one of the world’s leading manufacturers of
trucks, buses, industrial and marine engines with an
excellent reputation and highly loyal customers.
Scania`s six- and eight-cylinder marine engines, ranging
from 294 kW to 735 kW are the most popular Scania marine
solution, featuring an array of flexible options regarding
ratings, equipment, transmissions and instrumentation.
Every year Scania builds more than 80,000 engines on it
modular five-, six- and eight-cylinder platform. Scania
engines are found operating in many different conditions
around world in truck, bus, industrial, marine and power
For further details contact Paul Cowell or David Bamber
Telephone : 01908 210210 or visit www.scania.co.uk
TELEPHONE +44(0) 1908 210210
Email : firstname.lastname@example.org
Phone : +44 (0)1642 769085
Website : www.spiewhs.com
Spie Limited is a specialist electrical and instrumentation services provider within the industrial market. Its markets include power generation, onshore and offshore oil and gas and specialist manufacturing. It has a long established culture and core engineering skills. SPIE supports and brings innovative solutions to local authorities and businesses to design, build, operate and maintain their facilities.
For further information please contact Steve Craddock on +44 (0)1642769085 or visit http://www.spiewhs.com
Email : email@example.com
Phone : 01489 890 749
Website : https://www.stonemarine.co.uk
The companies in the Stone Marine Group are among the world’s leaders in the design, manufacture, service and repair of propulsion equipment. A position they have occupied for nearly 200 years since Josiah Stone developed his design for a screw propeller.
Today the Group companies design and manufacture propellers and sterngear for vessels of every type and size, commercial, naval and leisure, whilst specialist companies within the Group service and repair propulsion equipment regardless of the company that manufactured it.
Our service and repair company, Stone Marine Shipcare is operational worldwide 24 hours a day 365 days of the year. Their recently introduced mobile workshops mean they can now get, not just their engineers but also the highly advanced equipment necessary for propeller repairs and modifications, to ports all over the world very quickly.
Email : firstname.lastname@example.org
Phone : 08009173065
Website : www.ukdryrisers.co.uk
UK Dry Risers Ltd, is part of PTSG, a UK markets leader that specialises in access and safety, electrical services, specialist building access and fire solutions.
Access and Safety
Building Access Specialists
For further information contact Phil Hastie on 0800 917 3065 or visit www.ukdryrisers.co.uk
We accept: Credit Cards, Debit Cards, Net Banking, Cash/Bank Transfer, Demand Draft/Cheque, Money Order, Paymate, ITZ Cash Card. We support all leading banks. 100% Safe & Secure.