Ship repair and conversion, Offshore Oil & Gas, renewable energy, large steel fabrication.

A&P Falmouth, part of the A&P Group, is superbly situated on the gateway to the English Channel, in the third largest, natural deep-water harbour in the world. A&P Falmouth makes the most of its natural resources and convenient location, close to the Western Approaches and shipping lanes of Northern Europe.

Ship repair Facilities

•         Three large graving docks (252.8m x 39.6m/220.9m x      26.8m/172.5m x 26.2m)

•         Deepwater craned berths 

•         Afloat repairs in Falmouth bay

•         Slops Reception facilities

•         Class approved for in water surveys

•         Accommodate vessels without gas freeing

•         Stores reception facility

Falmouth has the capacity to accommodate vessels up to 100,000 tonnes, with workshops and resources, offering onsite engineering, fabrication, electrical, pipework, plumbing, and painting.  A well-developed local and national supply chain provides all requirements for marine specialists and OEMs. 

A&P Falmouth has highly skilled personnel and well-equipped workshops, providing the capacity to resource, facilitate and manage the most complex of marine engineering projects, in a safe and organised environment.

Port Services

Falmouth is a busy working port with deep water berths, cranes and a full range of equipment capable of handling bulk, break bulk and containerised cargoes.  Located within the docks are over 30 companies, which provide a full range of services including stevedoring, towage, bunkering, ship’s agency, port health, diving services, local surveyors, and chandlery and boat services. The Port also has many cruise calls with over 20,000+ passengers annually, who see Falmouth as the gateway to Cornwall and its beautiful attractions and scenery. 

PRODUCTS/SERVICES

Ship repair and conversion

Dry-docking and conversion of Commercial vessels, Military vessels, Oil and Gas and Renewable Energy construction and service vessels.

Fabrication

Cargo handling and storage in Falmouth

Pontoons and shore side access systems

Design and fabrication of steel and concrete pontoons and bespoke access systems for ports, and marinas.

For further information contact Drystan Jones on +44 (0)1326 212 100 or visit www.ap-group.co.uk

AIS, formerly Advanced Insulation Systems (incorporating Covertherm, Manuplas, and Bardot) is an award-winning global supplier of insulation, passive fire protection, buoyancy, and cable protection systems. From design and build to installation and maintenance, our customers count on us to deliver best-in-class service advanced material products — off-the-shelf and bespoke — that perform in the world’s most challenging environments.

For further information contact Gary Holt on +44 (0)1752 771 740 or visit www.aisltd.com

AqualisBraemar Ports and Harbours is a part of AqualisBraemar Technical Services and are able to draw on the experience of master mariners with pilotage experience, naval architects and risk analysts. We offer a comprehensive range of services to the ports and harbours sector providing advice on issues such as marine risk, marine operations, mooring and fendering systems, vessel manoeuvring and berth utilisation, as well as offering due diligence services and incident investigation. We also work closely with our sister company Offshore Wind Consultants for renewable energy projects.

For further information contact David Faulkner on +44 (0)0203 142 4350 or +44 (0)7748 967 106 or visit www.aqualisbraemar.com

The Ashcourt Group is a Hull based family run organisation which has expanded significantly since its humble beginnings in 2009 and now has over 300 employees.
The Ashcourt Group have invested significantly in its people. Employing highly skilled and experienced individuals from a range of backgrounds means we can deliver the results our clients expect.

 Atkins is at the forefront of the offshore renewables revolution, providing robust concept and detailed engineering design and owner’s engineer services in the wind, wave and tidal energy sectors.

Atlas Copco Rental is a specialist in the provision of innovative and competitive compressed air rental solutions. Combining leading edge technology, reliable equipment’s and a total rental offering to optimise your business needs. Our personal attention and dedication ensure you receive the support of a market leading company giving full technical advice and back-up before, during and after any project.  First established in 1973, we have an extensive and proud history of delivering competitive equipment and competences covering engineering projects in the North Sea / UKCS and beyond. Our key products of HP compressors, safe and hazardous area use air / nitrogen boosters, membrane units, dryers and auxiliary power place us at the forefront of this rental market.

For further information contact James Cunningham on +44(0)1382 878916 or visit www.atlascopcorental.co.uk

BAUER Renewables Ltd. with its offices in Scotland, UK, is the BAUER Group, marine solutions division for designing and installing steel foundation piles in all offshore environments, especially those with difficult seabed soils. 

For further information contact Bill Shaw on 01382 767 375 or visit www.bauer-renewables.co.uk

Bibby Marine

We own and operate Walk to Work Service Operations Vessels, and floating hotels for workers offering flexible near shore accommodation.We are a subsidiary of Bibby Line Group, a family-owned British company with a maritime heritage dating back more than 210 years and annual global turnover of £800. 

SOV’s

Our two Work Service Operations Vessels (SOVs) are named the Bibby WaveMaster 1 and Bibby WaveMaster Horizon. 

Why use our WaveMaster SOV’s?

Our SOV’s provide comfortable and modern living conditions and safe access to remote working locations such as offshore wind farms and oil & gas platforms. The SOV’s offer flexible deployment and feature dynamic positioning, advanced gangways, motion compensated cranes, and various options for technician access (heli-deck, daughter craft and Crew Transfer Vessels).

Our WaveMasters are eco-friendly (with minimal harmful emissions and very low fuel consumption) with high quality accommodation including en-suites with TV, WIFI and facilities such as gyms and gaming rooms.

Floating accommodation barges

We also own and operate six floating accommodation barges; Bibby Challenge, Renaissance, Stockholm, Progress, Bergen and Pioneer. All designed to provide nearshore floating accommodation services globally to a range of clients from construction through to hospitality. 

Why choose our floating accommodation barges?

·     Worldwide capability (wherever you require)

·     Convenience and comfort (with hotel standard facilities)

·     Tailored for you (as much or little assistance as you require)

·     Worker satisfaction (quality living areas on board)

·     Low environmental impact

·     Cost effective

We work in industries ranging from oil and gas, to shipyards, and for humanitarian causes (amongst others.)

For further information contact Marketing Executive Anna Williams on +44 (0)151 433 9043 or visit www.bibbymarine.com

Our customers live in a world of ever-increasing change: growing compliance, new global competitors, the pressure to do more with less, ever faster innovation cycles and less time to exploit market positions or new technologies. BMT brings domain experience coupled with management, engineering, science and technology know-how to help our customers compete in this world of accelerated change.

BMT is an independent, multi-disciplinary consultancy delivering solutions to industry, commerce, policy makers, regulators and public-sector operators. We offer specialised expertise to solve our customers’ most complex challenges in a wide range of markets.

Buttimer is a diversified mechanical engineering firm specialising in bulk materials handling solutions and high-quality steel fabrication. From one-off design, fabrication, installation or repair works, to full turnkey projects, Buttimer Engineering draws on skilled teams to deliver the service that our clients require.

From fabricating pressure vessels, to shut-down maintenance at a power station; from turnkey facility design to the supply of individual pieces of equipment, Buttimer bring our problem-solving ethos to each job and partner with our customers to cost effectively deliver the required performance.

With roots dating back to 1987, Dales Marine has been servicing the shipping, oil and gas, chemical, and power generation industries with bespoke engineering services, within the shortest lead time to the highest standard.  Providing specialist shipping solutions in dry dock and steelwork, maintenance and ship repair, 

Dales Marine is located within major Scottish ports and provides unrivalled access for clients 24/7, 365 days a year. Well known for its proven ability to produce optimum results and high levels of technical skills, Dales Marine has built up a considerable client base including major industry companies in the UK and internationally.

For further information contact Andrew Malcolm on +44 (0)1224 212778 (24/7) or visit www.dalesmarine.co.uk

Dublin Port Company is a self-financing, private limited company by the State, whose business is to manage Dublin Port, Ireland’s premier port. Dublin Port Company provides world-class facilities, services, accommodation and lands in the harbour for ships, goods and passengers.

For further information contact Charlie Murphy on +353 1 8876000 or visit www.dublinport.ie

Dura Composites has a track record of 25 years designing, manufacturing and supplying advanced GRP solutions for commercial marine projects – including open mesh anti-slip grating, heavy duty profile sections, access structures and ladders. Unique to Dura Composites, our d² products are safer, faster, stronger and proven, and our unrivalled product data helps you make faster and better decisions.

For further information contact Dean Fuller on +44(0)1255 440 297 or visit www.duracomposites.com

We provide a tailored cost-effective service in marine, offshore and renewable sectors. Our strength is our ability to help identify and deliver our clients objectives safely, on time and on budget.

Marine Engineering Consultants

Projects & Support

Surveying Services

HSEQ Consultants

Offshore Services

Renewable Services

Towage Consultants

For further information contact Sterling Elliott on 01642 200076 or visit www.forte-maritime.com

Gardiner & Theobald is an independent construction and property consultancy working across all sectors of the built environment. We focus on minimising risk and creating opportunities to maximise the value of our clients’ developments and property assets. We deliver Project Leadership, Commercial Success, Construction Excellence and Specialist Consultancy working across all sectors of the built environment.

We have particular expertise in providing cost management and project management for ports, harbours and marine projects as part of our Major Projects and Infrastructure sector. Our team of specialist experts create a unique pool of talent to support a diverse range of clients and the commonalities we find between major projects allow us to add value through cross fertilisation of ideas, sharing of best practice and drawing upon the extensive benchmarking data that underpins our advice. Projects that we deliver are often large scale and complex and have significantly different requirements, so bespoke solutions are developed for each project with flexibility built-in.

For further Details contact John Michaelides on +44 (0)2380 574 543 or visit www.gardiner.com

Geobear keeps things running. How? We inject a polymer into the ground that has become unstable. It lifts buildings, fixes cracked concrete and uneven floors, and makes the ground stronger. We are 10 times faster than the normal way to repair subsidence, which involves building work and often closing the business or moving out of your house. But not with Geobear. The work is finished in hours or days, rather than weeks or months and comes with a 10-year guarantee.

Geobear is an environmentally friendly company. Working exclusively with Covestro (formerly Bayer Material Science), Geobear has developed polymers that do not affect groundwater. Compared with the alternatives, Geobear’s carbon footprint is exceptionally low.

Geobear is a global company. In nearly 40 years it is worked in over 50 countries, with main operations in the UK, Sweden, Poland, and China.

When the ground gets unstable, Geobear fixes all the problems: cracks, uneven surfaces, voids, broken joints, pumping slabs, vibration echoes, water damage and more.

For further information contact Kevin Doyle on 0800 084 3503 or visit www.geobear.co.uk

Graham is a privately-owned company with an impressive history built on integrity and responsibility.The business became incorporated as a private limited company in 1955.The company has grown steadily and significantly since then to become a leading player in all areas of construction throughout the UK and Ireland.

GRAHAM now operates from 23 regional offices in the UK and Ireland.                                    For further details contact Malcolm Loader on                                                                        Telephone : 07584700056 or visit www.graham.co.uk

GRP Gratings supply GRP grating and composite products to the UK market place. Walkways, pontoons, marina decking, ladders, structures and a full design and installation service throughout the UK.

Our speciality products for the marine industry are Mini and micro mesh grating which is widely used where there is a requirement for non slip capability. GRP products provide an efficient and cost effective solution all walkways, flooring and decking areas requiring long term performance in very aggressive and corrosive/chemical environments. Unlike any metal grating, moulded GRP panels can be easily cut and fabricated on site using only hand tools. The ease of handling makes it ideal for difficult to access areas. We like to think ourselves as a unique one stop shop facility offering customers outstanding service and quality products.

For further details visit www.grpgratingsystems.co.uk or email info@grpgratingsystems.co.uk

 Harland and Wolff Industries Limited is a leader in design engineering, ship repair & conversion, manufacturing, assembly and logistical services for renewable energy projects.

For further information please contact Lisa Fairley on 02890 458 456  or visit www.harland-wolff.com

Green Marine Engineering & Design

Houlder ltd  is a fully independent marine design and consultancy group active in Marine, Offshore Oil & Gas, Renewables, LNG and Defence markets. We provide expertise in ship design, bunkering and LNG transfer, port design consultancy, caisson design, feasibility studies, expert witness, ship survey and analysis and plan approval. Contact us to find out more about our proven track record of delivering innovative designs with a focus on meeting current and future environmental legislations. We have experience in LNG bunkering and transfer infrastructure, LNG conversion and hybrid propulsion, engine scrubber installation and ballast water treatment system integration design and retrofitting,

Houlder ltd is an independent, employee owned offshore consultancy operating throughout the UK and internationally. You can read more at www.houlderltd.com    

Contact Jamie Sinclair +44 (0)23 9287 5277 to discuss your project requirements.

Hythe Shipyard operates a heavy slipway for commercial and non-commercial   vessels up to 55 metres, plus a  100 Ton travel hoist.

Our professional and experienced team can also provide solutions for emergency and short-notice haul-outs for RIBS, leisure yachts, workboats, barges and superyachts. 10,000m2 of undercover vessel storage is available for short-term routine maintenance to long-term build/refit projects. Alongside and deep-water moorings are also available for vessels 10m to 100m, with easy and unrestricted access to the Solent.

For further information contact Rob Hammond on +44 7526 168 775 or visit www.hytheshipyard.co.uk

Headquartered in Middlesbrough, UK, IMH was founded in Teesside by hydraulic engineer Paul Griffiths in 1983. We have grown from a home-based business to a leading global player in hydraulic engineering with experience of working across more than 50 countries.  We deliver major hydraulic engineering projects and offer services across design, manufacturing, installation, commissioning, maintenance and repairs, as well as component supplies and training.  By closely engaging with IMH, companies can tap into a deep source of hydraulic engineering talent and access a range of specialist skills not normally available in their own engineering departments.  IMH creates innovative new hydraulics solutions by drawing on our extensive engineering knowledge, experience of real-world applications and understanding of a wide range of industrial environments.  And, our technical experience and track record enables us to act as a hydraulics consultant to customers, helping them to make the best decisions for their business or project.

For further information contact Mike Goldsworthy on +44 (0)1642 802700 or visit www.imh-uk.com 

MARINE ENGINEERING

We’ve got experience and competence to carry out comprehensive shipyard projects. Our activities adhere to the rule of offering our customers across the board services while relieving them of time and price risks.

We pay high attention to proper planning, use of cutting edge technical solutions and keeping deadlines while maintaining an adequate and competitive price level. Fulfillment of regulations pertaining to safety at work and environment are treated as a first priority.

The portfolio of our customers consists of ship owners, new build and repair shipyards as well as businesses from the off-shore industry (operators of rigs and supply vessels).

The scope of our services comprises of, but is not limited to:

§  Hull construction and assembly

§  Modification and adaptation of ships and rigs

§  System installation and start-up

§  Assembly of pipe installations

§  Welding works

§  Electrical works

§  Project management.

We operate globally through our international network nad work on 24/7 basis with very short mobilization times for both personnel and equipment. We can perform our tasks both at the shipyards and during vessel’s voyage or at-sea operations.

Inter Marine - Shipping: Shipyard & voyage repair – a core business strength, our high-quality repair works can be undertaken anywhere in the world, including at sea. Conversion & mobilisation – upgrades, alterations, changes of purpose; we can handle any scale of project on your behalf. Ship building – we can apply our fabrication skills to new build ships or modular projects, from steelwork to out-fitting.

For further information contact Mark Bowden or David Bailey on+44(0)1305 470190 or visit www.intermarineuk.com

If you are looking for a friendly and helpful industrial rubber products supplier with good product knowledge and excellent customer service, then you’ve come to the right place.

We supply a vast range of quality items including rubber sheet and an array of fabrications made from premium grade elastomers including silicone and Viton® – many of which are available for next day delivery.

Having dealt with the rubber needs of a variety of industries for over 30 years, we have plenty of experience too.

Whether you are looking for silicone sheets, rubber mouldings, gaskets, extrusions, bellows, fabrications, rubber sealants or adhesives including Viton™ sheets and sealants: J-Flex can help

For further information contact Richard Lewthwaite on 0777 712 400 or visit www.j-flex.co.uk

 JACOBS

Jetrac®

Our engineers are able to conduct varying levels of onboard surveys to establish baseline information, this will determine the material state for every Flexible Hose Assembly (FHA) onboard a particular vessel or asset.  The main benefit is to highlight damaged assemblies eliminating any potential risk to personnel, production and environment in the event of hose failure.  

This service-critical data is stored and accessed through our Jetrac® system which is a web accessible database ensuring an accurate and up-to-date record of all Flexible Hose Assemblies. 

Having a Flexible Hose Asset Management System in place provides accurate data to plan maintenance and ensure equipment can work to its maximum capacity.  It can also be used to filter for any FHA’s due for change out in accordance with the customers’ requirements.

Approved and accredited by the British Fluid Power Association (BFPA), our engineers can manufacture and test a wide variety of hoses to meet specific customer requirements.  We hold / manufacture hoses to Defstan 47-32 for UK MOD and can also manufacture and supply a wide range for commercial use.  Please see below for the range we can offer:

• 1WB and 2WB, 4SP, 4SH, R13 and R15 (braid & multi spiral range), PTFE Hoses,     Stainless Steel hoses and Thermoplastic hoses.
• Bore size 3/16” to 2” as standard but we can also accommodate any specific customer requirements.  For eachhose that we manufacture we can also provide a full technical drawing.

All hoses are pressure tested at our facility to the required pressures for the hose application, we can also offer mobile testing anywhere onsite at customer locations / facilities.  All our surveyors are competent hose manufacturers and fitters and can carry out a variety of installation/change out projects.  

For further information contact Sara Blake on 01243 956992 or Lee Greenfield on 01243 956991 or visit www.jetrac.co.uk

Having spotted a gap in the market Mr Jones founded Jonesco for the manufacture and sale of steel mudguards. By mid-to-late 70s we were in full ‘rock n roll’ mode with the introduction of plastic mudguards all thanks to the bespoke rotational moulding machines. As we delved deeper into rotational moulding we soon became experts, ultimately paving the way to today’s success and expansion into the fire, environmental and storage industries.

For Sales enquires Please send email to pfoley@jonesco-plastic.com

Founded in 1972, JW Automarine are world renowned as being the industry leader in PVC manufacturing of Underwater Lift Bags, Buoyancy Systems, Proof Load Test Bags, Strops, Helium Bags, Flexible Tanks, Flexi-Tainer, Flexi-Dams and specialist bespoke products. Synonymous with quality and performance and reputed on fast delivery. JWA Hire was launched in 2020 providing the customer the ability to hire core products including lift and load test bags.

For further information contact Chris Dawson on + 44 (0) 1328 852316/ + 44 (0) 7787 735 509 or visit www.jwautomarine.co.uk  

Kaymac Marine & Civil Engineering Ltd is a multi-award-winning UK Commercial Diving and Marine Civil Engineering Contractor who has delivered exceptional service for clients since 1976.

Kaymac are specialist civil and marine engineering contractors that are experts in delivering complex in-water construction challenges. Kaymac have intensive experience delivering small-and large-scale projects as a principal contractor and as a specialist sub-contractor, offering a turnkey solution, everything from initial solution ideas and design to delivery and aftercare. Work that includes lock gate and pintle refurbishments, concrete repairs above and below water, limpet dam design and installation temporary works design and installation, de-silting and inspections. 

From the company’s roots as commercial diving contractors right through to rail engineering and civil engineering for coastal and inland waterways, Kaymac’s comprehensive list of services continues to expand to meet the requirements of clients Nationwide. Providing pioneering marine and civil engineering solutions to meet the needs of our customers: Engineering innovation above and below the waterline.

For further information contact Jeff Lippiett on +44 (0)1792 301818 or visit www.kaymacmarine.co.uk 

Keel Marine is a long established International Maritime Consultancy with experienced Naval Architects, Marine Engineers and Surveyors able to undertake all types of Marine Design, Survey and Supervision along with the provision of expert independent advice. Keel Marine offers services in Ship and Boat Design, Marine Survey, Vessel Stability and Project Management as well as Supervision of Ship Building, Repair, Conversion and Life Extension Programs.

Established in 1962 Keel Marine provides Naval Architecture and Marine Engineering Services worldwide to an impressive range of commercial and government entities.  Its reputation for excellence and high standard delivery across a diverse range of marine and offshore engineering ensures our clients return time and again.

Keel Marine’s skilled personnel include Naval Architects, Marine Engineers, Marine Surveyors and the support services needed to provide our clients with a comprehensive design, engineering and project management service covering most types of vessel in the marine and offshore industries along with comprehensive consultancy services to Government and non-government organisations worldwide.

News

Keltbray Group is a UK leading specialist business, which offers engineering, construction, demolition, decommissioning, remediation, rail, environmental services and reinforced concrete structure solutions & Sheet piling services.

The company is a key player in developing and maintaining Britain’s built environment and operates in highly regulated environments; making sites ready for new infrastructure and developments.

With the goal of being best in class, customers trust in Keltbray to deliver projects safely, on time and budget, and with care for the environment and our communities. From being founded as a smaller earth and groundworks company in 1976, the company has over the past four decades grown to become a £300 million Group of companies that provide specialist services and is unrivalled in the UK.

For further information contact us on +44(0)20 7643 1000 or visit www.keltbray.com

 Land & Marine Fabrication Services Ltd is a newly formed company offering a very reliable and high quality service to all customers, regardless of the amount of work required. Over 20 years of experience designing, fabricating and supplying various bespoke items for the oil and gas industry and working closely with all relevant certifying authorities such as DNV, Lloyds Register, Bureau Veritas and ABS as well as providing services for the on-Shore industries.

Macduff Ship Design Ltd has become one of the most prolific naval architect and marine consultancies in the commercial and fishing sectors.

It’s 6m to 50m designs are seen across the world in numerous forms: work boats, tugs, fishing vessels, ferries, pilot boats, patrol boats, dredgers, research vessels and multipurpose vessels.  We offer a comprehensive range of professional and technical Naval Architecture and Consultancy services to the commercial marine and fishing industries.

For further information contact Ian Ellis on +44 (0)1261 833 825 or visit www.macduffshipdesign.com

Civil Engineering and Construction

Dredging

Underwater Survey and Reporting

Inspection, Cleaning and Maintenance

Underwater Welding, Cutting and Burning

Vessels Inspection, Cleaning and Maintenance

For further information contact Sam Preston on 07940 300574 or visit www.marineandcivilservices.co.uk

Since that time our business has developed to meet the diverse needs of our clients in the face of increasing legislative pressures of working in the marine environment. In 2007 MESL benefitted from becoming part of The Gardline Group, a multi-disciplinary organisation involved in satellite communications, security, ship building, dry dock engineering, digital mapping and vessel charters.

For further information please contact Daniel Brutto on 01225 442211 or visit www.seasurvey.co.uk

One of the oldest established commercial diving companies in the UK. Established in 1970 as an inshore/inland diving company. Our operations are carried out both nationwide and internationally.

The company is based in Rochester, Kent in the UK. Our depot is located in Chatham Dockyard on the River Medway.

Our dive teams can be supplied with mobile vans to transport dive systems to any site in the UK. In addition these dive systems can be unmounted and loaded aboard vessels for use.

We are registered with the HSE as an inshore/inland diving contractor. The firm has never been issued with a HSE improvement or prohibition notice.

We are a full member of the Association of Diving Contractors. All of our supervisor divers must complete the ADC supervisors examination.

Lloyds Register approve us as a contractor for in water shipping surveys and repairs.

For further details contact Peter Hutchinson   on +44 (0) 1634 829 818  or visit  www.medwaydiving .co.uk

MGL Cable Services is a cabling focused electrical engineering company based in the North East of England.

Part of the MGL Group of Companies, we have the expertise to fulfil the full scope of a large project or deliver a single service as part of a smaller scope within a large project.

Our processes and procedures enable us to deliver consistent outcomes and we share our knowledge and lessons learned with clients and delivery partners.

MGL Cable Services work to high quality standards embodied within our SHEQ management systems, endorsing our Zero Harm policy to provide every client with complete peace of mind.

We ensure that customer service and satisfaction are our priority and as a service provider, we work closely with the client to ensure the smooth delivery of services and projects, to specification, on time, and on budget.

Specific expertise includes 

·      High Voltage Cable Jointing up to 400kV

·      High Voltage Cable Testing

·      Fibre Optic Cable Splicing 

·      Fibre Optic Cable Testing

·      Offshore Termination & Testing

·      Project Management

·      Project Support 

·      QA/QC Representatives

·      Technical Documentation 

·      Drafting,

·      Client Witnessing

·      Civil Construction and Plant

·     High Voltage Cable Fitters and Specialist Engineering Consultancy.

For further information contact Geoff Briggs on 0191 383 9900 or visit www.mglgroup.co.uk

Dredging Contractors Portsmouth. Here at ML DREDGING we are a family run business based in Portsmouth. We specialise in capital and maintenance dredging for all aspects of the marine industry. We also provide a bespoke charter service for all of our vessels and equipment. 

We have a large range of vessels including road transportable cutter suction dredgers, modular dredging pontoons, versatile adapted backhoe dredgers and even a small dredging platform, perfect for inland waterways or locked marinas. Working in tandem with these dredgers we have self-propelled split hopper barges ranging in capacity from 60m3 up to 460m3. 

We strive to adapt our equipment to suit the diverse requirements of our customers. With an extensive heavy engineering background and our own fabrication workshop based in Portsmouth, it is easy for us to adapt our vessels and equipment to suit any needs of the dredging industry including the dredging of drop docks with extended  equipment for removal of silt from under pontoons or walkways. 

We incorporate a range of services in marine consultancy including pre and post dredge surveys, volume calculations, dredge profiles, risk assessments best methods or even just a friendly chat as well as licensing and project management.

For further information contact Joe Liney on 02392 824210 or visit www.ml-dredging.co.uk

NewWaves Solutions Ltd is a British dredging, environmental and marine engineering solutions provider active throughout the UK & Ireland. 

NewWaves Solutions is part of the Belgian DEME Group, which has been carrying out dredging, land reclamation, marine contracting and hydraulic engineering projects worldwide for more than 140 years.  

More recently it has established itself as a leading supplier of marine and engineering services in the offshore energy industry. 

By combining the strength of the Group’s operating companies (DEME Offshore, DEC, DBM, DBE, DIMCO) under one roof, NewWaves Solutions is able to provide a single point of contact for UK-based projects. 

Innovation is in our DNA. We are continuously developing and implementing new techniques, as well as investing in state-of-the-art vessels and equipment, to best deliver our services. 

NewWaves Solutions is a full EPCI contractor able to take on the most complex and challenging project. It has a wide-ranging portfolio delivered into its key markets as shown below: 

• Dredging & Land Reclamation  

• Marine & Offshore Solutions - DEME Offshore  

• Fluvial & Marine Aggregates - DBM Division 

• Environmental Solutions - DEC Division 

• Marine Infrastructure Solutions - DIMCO Division

For further information contact Will Shields General Manager on +44 (0)7780 335925 or visit www.deme-group.com/newwaves

NORTHERN DIVERS (ENG) LTD specialise in underwater civil engineering, commercial diving to 50 metres, inland and coastal work (up to 12 miles offshore), harbour and dock maintenance, salvage, sluice / gate maintenance, structural inspections and repairs, windfarm operations, hydrographical surveys, bridge inspections and pipeline installations, to name but a few of our services.

For further information contact John Sparrowe on +44 (0)1482 227276 or visit www.northerdivers.co.uk

Offshore Marine Limited provides a comprehensive range of cost-efficient, high-quality product solutions to the oil and gas, renewable, fishing, and merchant vessels sectors with both standard and customised equipment design. We also provide reliable support services for cranes, launch and recovery systems, and winches to a range of clients around the world. Our equipment can be certified by a number of class societies.

Combining excellent products, strong client focus and a highly competent service, Offshore Marine provides a leading service for the global market. Offshore Marine brings a wealth of knowledge and experience to the supply, engineering, servicing and maintenance of marine top deck equipment, as well as related training. Our team has more than 50 years of industry experience in the marine, renewable, offshore and oil and gas sectors. Our managers and engineers are involved at every stage from enquiry through to design, engineering, delivery, training, installation, and testing.

We plan, engineer and deliver equipment for all types of vessels and installations, creating the most effective and efficient solutions for our clients. Our equipment is built to the latest codes (DIN15018 / EN13001 (shipboard use) and EN13852 (offshore use)) and can be certified by all of the leading classification societies, including Lloyds BV, RINA etc. For extreme environments, all electrical components can be ATEX approved.

Offshore Marine is clients’ “one stop shop” for the worldwide supply of cranes, lifesaving davit systems and deck machinery packages along with the related engineering, training and service support

Orkney Islands Council Division of Marine Services as the Competent Harbour Authority (CHA) which incorporates the Harbour Authority, Orkney Towage and Orkney Ferries is responsible for the safe and efficient operation of the 29 piers and harbours located throughout the Orkney Islands. It is the UK number cruise port call, handles 10% of the UK’s oil through Flotta Oil Terminal and increasing numbers of STS operations in Scapa Flow which is the largest natural harbour in Europe.  

Orkney is at the forefront of UK in Marine Renewables and energy decarbonisation.

For further information contact Paul Olvhoj on +44 (0)1856 873636 or visit www.orkneyharbours.com

Osprey is far more than a specialist logistics provider. Our teams deliver unexpected value by finding the right approach – we work better, together.

Port logistics involve unique challenges. Related projects and objectives need teams of experts who can collaborate night and day, worldwide. With over 25 years of marine experience, our own heavy logistics equipment to hand and, extensive customs experience, we have a reputation for both innovation and a commitment to enabling smooth deliveries. 

Helping to project-plan and deliver unusual assets, heavy-lift cranes, beach landings, the installation of major assets, barge projects, marine off-loading facilities … we also offer support for significant projects at short notice.

For further information contact Neil Schofield on +44 0191 250 3757 at hello@osprey.group or visit www.osprey.group

Penspen has been providing engineering, project management, asset management and integrity services to the energy industry worldwide for over 65+ years

Our heritage is onshore pipeline engineering and we have been involved in major pipeline projects around the world.  Our range of our services has expanded to meet our clients’ needs and we now provide the full scope of engineering services for the life cycle of an asset.

We have also developed an extensive range of training services covering engineering design, integrity, and operations and maintenance, for energy assets.

For further information contact Darren Bartlett on +44 (0)1224 644300 or visit www.penspen.com

 Refit, repair conversion and class-approved testing for vessels up to 75m

Rock Fall are Marine Drilling and Rock pre-treatment specialists.

SAACKE have been involved in firing technology for more than 80 years and are today one of the world leaders in this field. As specialists we plan, develop and produce burners and system solutions for Marine and Industrial thermal processes.  Our products and services are represented on ships and offshore installations as well as industry.

SAACKE on board. That means reliable, environmentally friendly and energy-efficient combustion plants for sea-going vessels, offshore plants and LNG tankers. The vast experience in the development, design and construction of new plants and conversion of existing plants pays off here.  SAACKE offers in-depth expertise and efficient order handling from a single source. Each individual combustion plant not only ensures high availability, but also meets the strictest environmental standards. That holds true for standard configurations and for plants with individual and tailored systems. A few examples: 

·      Gas combustion unit (GCU)

 Composite marine boiler (CMB)

·      Fired marine boiler (FMB)·       

Of particular note here is the FMB-VF-LONOX fired marine boiler. This extremely low-emission boiler is built for the limited space available on board and meets the strictest emission standards on land.  For conversions of existing plants, customers can count on the know-how, the personal consultation and customized solutions from SAACKE. Experienced teams carry out a detailed assessment of the plant environment before the start of the engineering work. It forms the basis for balanced dimensioning of all the components. Standard components or plants are integrated into the existing system or – if necessary – alternative possibilities are developed. Engineering, construction, manufacturing, support and service of marine systems are in the best hands at SAACKE, thanks to comprehensive know-how for standard applications and individual projects. Our customers appreciate not only the extreme reliability and very high availability of all the components, but also the outstanding efficiency and eco-friendly operation. And that over the renowned long service life.

For further information contact Phil Kemp on +44 (0) 23 9233 3900 or visit www.saake.com

Scania is one of the world’s leading manufacturers of 

trucks, buses, industrial and marine engines with an 

excellent reputation and highly loyal customers. 

Scania`s six- and eight-cylinder marine engines, ranging 

from 294 kW to 735 kW are the most popular Scania marine 

solution, featuring an array of flexible options regarding 

ratings, equipment, transmissions and instrumentation. 

Every year Scania builds more than 80,000 engines on it 

modular five-, six- and eight-cylinder platform. Scania 

engines are found operating in many different conditions 

around world in truck, bus, industrial, marine and power 

generation applications. 

For further details contact Paul Cowell or  David Bamber 

Telephone : 01908 210210 or visit www.scania.co.uk 

TELEPHONE +44(0) 1908 210210

Providers of all Siemens related marine spares electrical equipment, including Siemens shaft generator control hardware, low voltage, PLC equipment, system repairs and engineer call-outs.

Specialised Marine Support Ltd (SMS) is an ISO 9001:2008 accredited and Achilles FPAL registered company based in Scotland providing support vessels to the offshore renewables and offshore construction industries throughout Europe. All vessels are road transportable.

We can supply: 

11-14m Cabin RIBS

10m Open RIBS 

10m Fast Landing Craft 

Evolution 38

For further details contact Iain Hill on +44 (0)1852 300 341 or visit www.specialisedmarinesupport.com

The SMS Group specialises in repairs and refits across the Commercial Marine, Defence and Superyacht sectors, as well as major marine grade fabrication to include, but not limited to, floating structures and Work Boats.  The business trades from 7 locations in the UK; Lowestoft, Dover, Portsmouth, Southampton, Poole, Bristol and Plymouth.   

The company has dry dock and workshop facilities in Lowestoft and Southampton, and via partnership agreements the use of slipway in Hythe, Southampton, the dry dock in Shoreham, and the 3000T ship lift in Cherbourg, Northern France.  The SMS Group is the Souths largest ship repairer.  

In 2018 The SMS Group acquired the Exeter based superyacht-centric procurement specialist Global Services; which complements its core marine engineering services in both the Cruise and Superyacht sectors thereby providing an enhanced service offering to customers.    

The SMS Group build the Bulldog range of Work Boats, as well as numerous custom builds; to include multi-cat platforms, ferries, small dredgers, fisheries vessels and marine civils.  Svitzer have acquired several Bulldog newbuilds over recent years; the company is currently undertaking several bespoke newbuild for the aquaculture sector not only in the UK but also the Mediterranean.   

The SMS Group specialises in the delivery of a broad provision of professional services; mechanical engineering and structural fabrication, electrical and hydraulic engineering, diving and sub-surface engineering, marine grade insulation, pipework, plumbing and HVAC, outfit, interiors, flooring and joinery, blasting and painting and site management and logistics.  The business also facilitates marine civils manufacturing, dredging equipment manufacture, machining, CNC profiling, varying design serviced, coded welding, plate rolling, plasma profiling, plate shearing, milling, turning and Tig / Mig / MMA welding.

For further information contact Nicholas Warren on +44(0)23 8144 1010 or visit www.sms-marine.co.uk

A global provider of engineered products and services to the oil and gas, renewables and industrial sectors. 

Although we supply our engineered products and services to a variety of industry applications we specialise in delivering structured and bespoke solutions in the safety critical areas of lifting and mechanical handling, cable and pipe lay, and fluid power.

What we do

Working across the asset life cycle we: design, manufacture, rent, sell, operate, maintain, inspect, certify, refurbish, upgrade, remove, and replace equipment, and develop and train people.

The broad categories of products and services we offer include:

·      Engineering support

·      Equipment manufacture, sale & rental

·      Equipment & operations management

·      Inspection & integrity management

·      Training and competence assessment

·      Parts supply

For further information contact Craig Walker on +44 (0)1224 704868 or visit www.sparrowsgroup.com

 Spie Limited is a specialist electrical and instrumentation services provider within the industrial market. Its markets include power generation, onshore and offshore oil and gas and specialist manufacturing. It has a long established culture and core engineering skills. SPIE supports and brings innovative solutions to local authorities and businesses to design, build, operate and maintain their facilities.

For further information please contact Steve Craddock on +44 (0)1642769085 or visit http://www.spiewhs.com

Located in Peterlee, Co Durham, ThyssenKrupp Rothe Erde company is a member of the ThyssenKrupp organisation. 

Manufacturing slewing bearings of diameters of up to 2100 mm, including both ball and roller bearings. Wire race bearings are also manufactured and supplied for various applications. Other product ranges include the supply of seamless rolled steel and non-ferrous rings, turntables and structural elements. 

ThyssenKrupp slewing bearings have been for decades developed and researched by state-of-the-art technology for customers worldwide in a variety of applications. 

Advanced calculation techniques such as Finite Element Analysis, guarantees economical and safe dimensions of load transmitting elements and of components where deformation is a critical factor. 

The competent consultation with our customers, the high quality of the products and the innovative further development of the technology in the Research & Development centre at our Lippstadt, Germany works are the foundation to actively take on the challenges proposed by our international markets.

With our Headquarters & main manufacturing plants in Dortmund and Lippstadt, Germany we also have other manufacturing subsidiaries in USA, Brazil, Spain, Italy, France, Japan, China and shortly India. In addition to the above we have sales agencies in all major Industrial countries giving ThyssenKrupp Rothe Erde a worldwide market presence much to our customer's advantage.

For further information contact Andrew Streatfield on +44(0)191 5188600 or visit www.roballo.co.uk

Our mission is to provide customers with comprehensive, value engineering services, which match their needs and expectations.

TMS has been providing professional marine and land based civil engineering services since 1991. We take the time to learn what is important to our customers and then gear our work so that our customers’ expectations are fully met. We are greatly experienced in working as the Principal Marine Contractor, where we are able to provide a full, one-stop-shop construction service. We can also provide design services as well using our design partners for a full turn-key project. TMS are also fully able to work as a sub-contractor for large civil engineering and building companies, who approach TMS for marine expertise and the use of our specialist marine and land-based plant.

Marine and Industrial engineering specialists with a positive ‘can do’ attitude offering a genuine 24/7 worldwide service Providing comprehensive & effective engineering solutions to our customers minimising downtime & disruptions to their business Our core skills are constantly updated to maintain, develop & exceed our current high standard, allowing us to provide safe, reliable & high quality services.Combined our modern workshops offer over 18,000sq ft of covered space complete with overhead crane facilities. This allows us to fabricate up to 10tonnes inside & unlimited on quayside (Chatham Docks).The larger of our 2 workshops our Faversham base offers the following facilities;

Fabrication Shop

Comprehensive fabrication shop, (over 5000sq ft) capable of batch & bespoke fabrication in most materials inclusive of mild and heavy steel, stainless steel & aluminium

Structural Steel Fabrication

All our Engineers are time served and highly skilled offering a wide range of skill sets in the following disciplines:

Marine Diesel Specialists – Overhaul & Refurbishment

Mechanical Engineering

Coded Welding

Pipe Fitting in all Materials

Electrical Engineering – Marine Specialists

Fabrication

Sheet Metal Fabrication

Health & Safety Advisor

Project Management

Apprenticeship Scheme

Training / Apprenticeship Scheme

As a company we believe strongly in the investment of our staff, we offer a wide and varied training scheme for existing staff. Keeping all disciplines up to date and continually looking to expand our skill base.

Further it is our belief that we should invest strongly in the future of the industry, we therefore offer an extensive apprenticeship scheme in all our major disciplines. Currently in our employment we have;

3 x Mechanical Engineer Apprentices

2 x Welder / Fabricator Apprentices

1 x Electrical Apprentice

For further information contact Steve Hitch on 01227 751 033 or visit www.uplandsengineering.co.uk

WALLACE MARINE LTD supplied, installed, tested & commissioned a new 15 ppm oily water separator as Glasgow Nautical College with Class for students of our future.

We have installed (9) new Sperre air compressors with Lloyds class certification, please see pic attached. (JH120)

PNTL Vessels in Barrow In Furness. 

Our website visit our web page www.wallacemarine.co.uk 

WPH have over 40 years’ experience of large and small projects in the field of Marine Construction, Demolition & Plant Hire and is fully compliant with Health and Safety requirements.

We are ISO 9001 registered and the winners of two prestigious Institute of Civil Engineers awards.

All our craft are Port of London Authority registered.  The company is a PLA registered and approved contractor.

For further information contact Ian Bone on +44 (0)1795 422 764 or visit www.wphmarine.com

Wartsila services UK have the widest offering in the market whichcovers installations from spare parts, maintenance and technical support to upgrade & retrofit and full service agreements for the marine, offshore and industrial markets.

Wartsila Engine services provide complete engine related system services, covering both Wärtsilä and other engine makes in house or on site with a qualified team of engineers ready to be deployed, covering all requirements on land, in port and at sea. Both Aberdeen and Segensworth workshops have fuel injection facilities that can offer service and overhaul on all types of fuel injectors and fuel pumps

Wärtsilä Automation Services in Montrose are equipped to offer a complete electrical package including conceptual design, engineering, assembly, installation and commissioning of retrofit systems and fully recognise the importance of on-site support and application engineering.  Wartsila Automation are also proud to be the Authorised Service Centre and Agent for Basler Electric Company who are world leaders in power control and protection. Basler trained commissioning engineers are available to troubleshoot and commission AVR systems.Wärtsilä Propulsion Services UK, range from in-situ machining, straightening propeller shafts and rudder stocks, repair, retrofit and rebuilding as well as environmental solutions for metallurgical repairs of both propellers and shaft seals. Work is carried out in the fully equipped repair facility in Glasgow or on site anywhere in the world. Wartsila propulsion UK have a full team of highly qualified and professional service engineers who attend dry dockings to supervise and carry out hub overhauls, thrusters repairs and control set ups.

Our service businesses support all customers throughout the lifecycle of their installation.