Email : sales@adlerandallan.co.uk
Phone : 0800 592 827
Website : www.adlerandallan.co.uk
The Adler and Allan Group is a UK market leader in the provision of counter pollution services to over 90 ports, harbours and marine installations. Our services cover port and harbour oil spills, coastline oil spills, spill training, specialist spill response exercises, marine spill response consultancy and compliant waste management.
We are now an accredited third-party Tier 2 Oil Spill Response Organisation (OSRO) for sheltered / enclosed waters, coastal & large estuary and shoreline clean-up with the International Spill Accreditation Scheme (ISAS)
For further information contact on 0800 592 827 or visit www.adlerandallan.co.uk
Email : ukmarketing@aggreko.co.uk
Phone : +44(0)3458 247365
Website : www.aggreko.co.uk
Business Description
Aggreko works with port authorities across the globe to provide rental power generation and temperature control services. These help to support customers whilst assets are laying idle, so they can be quickly re-mobilised when the time comes.
1. Environmental control equipment to preserve assets
Whilst vessels are laid up, it is important for on-board assets to be kept in optimum condition, so they can be redeployed in future without excessive cost.
Aggreko can install temporary on-board temperature control equipment to prevent corrosion, condensation and freezing, caused by unwanted moisture and salt from coastal conditions.
Using a variety of heating and dehumidification equipment, the temperature and humidity of internal air spaces can be controlled. This ensures void spaces within machinery and pipelines remain dry and prevents corrosion damage and moisture absorption into electrical cables and fittings.
By creating a stable environment, our rental equipment ensures assets, such as the engine room, bridge and sensitive electronic equipment, remain in peak condition, no matter how long it takes before they are recommissioned.
2. Cost effective power
Whether hot or cold stacked, vessels will require some degree of power for tasks such as routine regular maintenance, or heating and lighting for crew. By using temporary dock side rental generators, customers can shut down their main engines or existing oversized emergency generators and improve operational and cost efficiency. As we undertake the refuelling, servicing and maintenance of our generators, customers can save additional money and manpower too.
There is a growing demand for dockyards to consider using low carbon emissions power. In such cases, gas generators can be a viable option.
3. Equipment testing prior to redeployment
If market conditions pick up, a re-mobilisation plan will be needed. As part of this process all power supplies and HVAC equipment should be load tested to ensure it functions properly when returned to full working order. The Aggreko team is experienced at providing this capability to load test the main generators, emergency generators, and any cooling systems on the vessel.
Rental solutions offer three main benefits:
Flexibility: Rental equipment can be scaled up or down with very short lead times to supply variable demands.
Wide range of equipment: Renting equipment offers the ability to change equipment, dependent on ambient temperatures or on-board power requirements.
End to end solution: Aggreko provides a complete service, from site survey, through to installation, continuous maintenance, refuelling and extraction. |
If you wish to talk to us about requirements, please contact us on +44 (0)3458 24 7 365 or email ukmarketing@aggreko.co.uk
Email : sales@angelmarine.co.uk
Phone : 02380 700246
Website : www.angelmarine.co.uk
Our access to international suppliers allows us to provide a wide choice of quality galley equipment for all your catering needs.
Angel Marine can supply an extensive range of marine and commercial laundry equipment;
Email : sales@betamarine.co.uk
Phone : +44 1452 723 492
Website : www.betamarine.co.uk
Our Product Specialities Are:
§ Sea Going – Heat Exchanger Cooled Marine Propulsion Engines from 10 to 150 bhp.
§ Inland Waterways – Keel Cooled Marine Propulsion Engines from 14 to 115 bhp.
§ Beta – Kubota Based Marine Generating Sets from 4 to 50 kVA.
§ Beta – Baudouin, Cummins, Perkins, Sabre, Scania or Volvo Based Marine Generating Sets from 30 to 1,000 kVA, which are available to class.
For Further Information Contact Andrew on +44(0)1452723492 or visit www.betamarine.co.uk
Email : enquiries@braemar.com
Phone : 0203 142 4300
Website : www.braemarsa.com
Email : angus.cochrane@chemcoint.com
Phone : 01236 606060
Website : www.chemcoint.com
Chemco International is a world leader in innovative coating solutions in the Protective & Marine Coatings Industry.
Our specialist, IMO approved anti-corrosion coatings are suitable for almost all vessel areas, including all tanks, pipes, decks, roofs and underwater applications.
Our focus is on solvent-free, wet & rust tolerant solutions which bring significant time, cost and environmental savings; as well as improved applicator safety when compared with conventional solvent-based paints.
For further information contact Angus Cochrane on 01236 606060 or visit www.chemcoint.com
Email : info@conidia.com
Phone : +44 (0) 1491 829102
Website : www.conidia.com
‘Diesel Bug,’ black slime or whatever your name for it, Microbial contamination can be, and is a serious issue. Reduced levels of sulphur and increasing Bio content is leading to more cases of rapidly worn injectors, frequent filter changing and other issues. Compliant to ASTM D 8070, FUELSTAT®Diesel Plus keeps operational assets safe by rapidly detecting Microbial growth. With just a fuel sample, a flat, dry surface, a FUELSTAT® test kit and 15 minutes, you will have a result; right here, right now and not in several days’ time. Test Aviation fuel on crew transfer helicopters with FUELSTAT®Resinae.
In addition FUELSTAT®Result is a simple, FREE Mobile Phone App used with the FUELSTAT®test kits, to provide the test results to your smartphone whilst generating a report to be viewed by certain registered users within YOUR organisation, providing a rapid, front to back and totally traceable audit trail within minutes.
About microbial fuel contamination - Microorganisms can enter the fuel chain at any stage. They live in the water phase and feed off fuel. By-products include biomass, sludge and acid corrosion. Prolonged, heavy contamination is an expensive issue. The effects can be devastating for plant, vehicles, aircraft and storage tanks as contamination can cause fuel pipeline blockage or corrosion. This leads to expensive mechanical intervention and significant downtime to clean fuel tanks and ancillary equipment. Detecting and dealing with this potential problem by testing early is the efficient, cost-effective answer to managing the risk of damage from microbial contamination. There are a number of proprietary tests on the market to determine the presence of microbial contamination, but many are laboratory-based tests or rely on culture growth and are therefore time- consuming. FUELSTAT® would appear to be the most simple to use test available on the international market. No special skills are required to use the test, and there is no investment needed for a reader to translate the results.
For further information contact us David Armitage on +44 (0) 1491 829102 or visit www.conidia.com
Email : chrisr@contractpilingservices.com
Phone : 0771198148
Website : www.contractpilingservices.com
As the piling industry has grown in its diversity, our skilled teams have seized the opportunity to utilise traditional piling techniques, alongside cutting edge technology, to overcome a wide variety of environmental constraints.
Our domestic and international customers have greatly benefited from the use of this technology and our innovative techniques, which have been developed over many years of planning and executing bespoke projects. In return, we continue to receive first hand operational feedback which assists new product development.
Contract Piling Services, through its comprehensive supply chain, source modern and well maintained equipment allowing us to accomplish not only standard installations/extractions, but also more unconventional projects that require specialist equipment and knowledge, as per our projects. More recently, we have completed a number of off-shore projects, further developing our sub-sea piling techniques.
Email : l.sanderson@cuphosco.co.uk
Phone : +44 (0)192 086 0600
Website : www.cuphosco.com
CU Phosco Lighting Ltd (formerly known as Concrete Utilities) is the longest established and premier outdoor lighting group in the UK. We design and manufacture exterior lighting luminaries, floodlights, lighting columns and masts. Our lighting columns and masts range from 3 metres to 60 metres in height and can be seen on motorways, at airports, in shopping centres, housing estates and sports stadiums throughout the world. We have since 1923 led the exterior lighting market here in the UK and worldwide. From our Head Office in Hertfordshire we offer our customers a comprehensive package, from the initial consultation to the design and the final colour presentation of a CAD lighting scheme, through manufacture of the equipment to delivery and installation. As we grow, so do the choices for our customers. Our range of products; High Masts, Tubular, Octagonal, Tapered, Aluminum, Mid and Based Hinged columns are manufactured at our factories in Gloucestershire and Yorkshire. All factories are accredited by BSI against Quality Management System ISO 9001:2008 and Environmental Management System ISO 14001. Our lighting programme "Lighting Reality" offers our customer a simple and efficient method of utilising the comprehensive range of exterior luminaries, floodlights, amenity and period lanterns that are being developed and tested at our Photometry Laboratory. Throughout the world we have supplied and installed Columns, High Masts and exterior lighting systems for all markets including Sports Stadiums, Airports, Ports, and Roads and more recently for the expanding market in Telecommunications.
For Further Information Contact Lee Sanderson on +44 (0)1920 860600 or visit www.cuphosco.com
Email : sales@dcrs.co.uk
Phone : 08000432688
Website : www.dcrs.co.uk
Established in 1987 DCRS have become one of the UK’s market leaders in the hire, sales and service of voice and data two-way radio communication products & applications to clients throughout the UK and Europe.
Email : enquiries@directwaste.com
Phone : +44(0) 1779 477311
Website : www.directwaste.com
Established in 1994, we are a family owned business that are leading the field of managing liquid wastes and sludge's through Scotland.
We provide innovative waste management solutions, excellent customer service and deliver added value with our compliance to ISO 9011:2015, ISO 14001:2015 & OHSAS 18001:2007 ensuring safety and the reduction of environmental impact.
Our guarantee is to recover as much material as legislation will allow for re-use or re-processing, thus reducing your eco footprint.
For further information contact Brenda Horne on +44(0) 1779 477311 or visit www.directwaste.com
Email : colin@docking-solutions.co.uk
Phone : +44 (0)1803 868 555
Website : www.docking-solutions.co.uk
Emphasis is on value for money, longevity, durability and the use of recycled materials. High quality is assured by their certification to the latest ISO Standards. Pontoons and bridges can be built in modules up to 25m long typically. Pontoon joints are designed to suit environmental conditions including grounding. There is an experienced design team. Fully trained permanent fabricators and installers who work in a large undercover workshop with an integral blasting and coating facility. The site provides direct access to the River Dart for pontoons to be delivered by water as well as good vehicular access.
For further information contact Colin Bowers on 01803868555 or visit www.docking-solutions.co.uk
Email : sales@frontierpitts.com
Phone : + 44 1293 548301
Website : www.frontierpitts.com
Frontier Pitts is renowned for British engineering. All equipment is designed and made to order at our UK Head Office.
European Office in Nimes, South of France – At the forefront of the European and African markets.
National and International Operations with equipment installed in more than 90 countries.
We have full project management teams at all our offices with a comprehensive customer service programme and multi lingual personnel
Asian Offices based in China & Hong Kong. Frontier Pitts are in partnership with G4S throughout the Middle East and Worldwide
Pitts expertise is based on over 100 years’ experience. The highly respected & well- established product portfolios of Frontier Gates & Pitts Security Gates are the basis of Frontier Pitts today.
Frontier Pitts is the leading British Manufacturer of Security Gates, Automatic Barrier, Road Blockers, Rising Kerbs, Bollards, and Pedestrian Control Gates and Turnstiles.
Frontier Pitts design, manufacturer, install, commission and then continue to maintain your perimeter security equipment for years to follow.
Frontier Pitts continuing, and extensive Research and Development program commenced in 2004, producing the Frontier Pitts IWA 14 & BSI PAS 68 Anti Terra range. Frontier Pitts first impact test was the Terra Blocker which was successfully impacted with a 6.8t American vehicle travelling at 80kph.
Our Platinum Range of Automatic Anti-Intruder Security Gates have proven to withstand forcible attack and are LPS1175 Security Rated 2 & 3. Our Terra Diamond Turnstile is LPS1175 Security Rated 3 & 4 andapproved for Government Use, please contact CPNI.
We are on the Government Approved Suppliers List & are accredited by various other companies nationwide.
For further information contact Sally Osmond on 01293 548301 or visit www.frontierpitts.com
Email : sales@gems-sensors.co.uk
Phone : +44 (0)1256 320 244
Website : www.gemssensors.co.uk
Gems Sensors & Controls is a leading manufacturer of a broad portfolio of liquid level, flow, pressure sensors, miniature solenoid valves, solid state electronics and fluidic systems.
Decades of application engineering experience has given Gems the knowledge required to deliver tailored products that measure up to todays sophisticated and critical applications.
Working around the world with global resources, and to exact customer application and manufacturing requirements, products from Gems Sensors & Controls are used in almost every industry sector.
For further details contact Nick Bloomfield on Tel: 01256 320244 or visit www.gemssensors.co.uk
Email : sales.uk@hempel.com
Phone : +44 (01633) 874024
Website : www.hempel.co.uk
Hempel is a world-leading coatings supplier to the decorative, protective, marine, container and yacht markets.
From windmills and bridges to hospitals, ships and homes, our coatings protect man-made structures from the corrosive forces of nature. They help prolong a structure's service life, reduce maintenance costs and, we like to think, make it more attractive.
Wherever we work, we always focus on innovative solutions and advanced production techniques. But our working method remains simple: we are curious, creative and self-critical, and always strive to create extra value for our customers.
We believe that the coatings industry can and should contribute to a better environment. So we invest in advanced waterborne products and innovative ideas to help customers cut fuel consumption, reduce emissions and hit their environmental targets.
We offer a full range of coatings and technical service to customers in the protective, marine and container industries. But we don’t just do big. We also supply low-solvent paints to homeowners so they can bring colour to their homes and we provide a full range of products for yacht owners.
In short, if you have something that needs painting, we most likely have a solution for it.
For further information contact Paul Avery on +44(01633) 874024 or visit www.hempel.co.uk
Email : Lelo@hydrobag.nl or info@hydrobag.nl
Phone : +31 851 305 411
Website : www.hydrobag.nl
Hydrobag is a company based in the Netherlands which formed in late 2018. Hydrobag develops and produces ecological solutions and safety products.
LEAK STOP GUN
The Leak Stop Gun is one of the products that is produced and sold by Hydrobag B.V
With the LeakStopGun we can close sudden erupted holes and leaks in a matter of seconds, with high precision and efficiency.
A must have for emergency services like Fire Department, Harbours and Police. For on every terrain with storage tanks and on board for ships. In short product id a do it all with closing holes. Did a pipe burst or is a storage tank leaking? The Leak Stop Gun is the answer to your unwanted leak!
At the moment there are 2 models of the Leak Stop Gun. The first model is the Leak Stop Gun 150, this particular tool can close of holes for a maximum of 15 centimetres wide. The second model is the Leak Stop Gun 400, which can close of holes for a maximum of 40 centimetres wide. Further technical data can be found on the website or by contacting the Hydobag company contact person.
For further information contact Lelo Tibana on +31 851 305 411 or visit www.hydrobag.nl
Leak Stop Gun 150 €2495.00 £2533.39 Leak Stop Gun 400 €3245.00 £2791.46
Email : info@hydrobag.nl
Phone : +31 851 305 411
Website : https://www.hydrobag.nl
Hydrobag is an intelligent bag, made of EPDM with a special reinforcement. Hydrobag can be layed in crawling space or other narrow spaces, and because of its flexibility it is possible to create a buffer of a few M3 on hot water. This in combination with a heat pump and/or solar panels.
Therefore it is possible to acquire a higher efficiency with less energy in a house, office space or company hall. The hydrobag is isolated in such a matter that the warmth loss is minimal.
With the LeakStopGun we can close sudden erupted holes and leaks in a matter of seconds, with high precision and efficiency!
Email : peter.mccance@kalmarglobal.com
Phone : +44 (0)845 163 0700
Website : www.kalmarglobal.com
A global business with one of the widest portfolios in the industry, we improve the efficiency of your every move through our worldwide service network and solutions for seamless integration of terminal processes.
For further details contact Peter McCance on Tel: 0845 163 0700 or visit www.kalmarglobal.com
Email : enquiries@maats.co.uk
Phone : +44 (0) 1452 546 570
Website : www.maats.co.uk
MAATS TECH Ltd is a Marine Engineering Consultancy and Naval Architecture company that has been at the forefront of vessel equipment and design since 1989 The current company portfolio can be summarised in three business areas namely Naval Architecture, Finite Element Analysis and Engineering.
Sectors: Oil & Gas, Offshore Renewables Exports: Brazil, Korea (South), Norway
For further information please contact on +44 (0) 1452 546 570 or visit www.maats.co.uk
Email : Teresa.Matherell@manuplas.co.uk
Phone : +441752771740
Website : ww.advancedinsulation.com
Manuplas manufacture and supply a range of high performance, low maintenance and lightweight vessel fendering systems, floating fenders and buoys for the worldwide marine and offshore energy markets.
Email : klevy@moffatnichol.com
Phone : +44 20 3206 1062
Website : moffatnichol.com
Moffatt & Nichol is a leading global infrastructure advisor specialising in the planning and design of facilities that shape our coastlines, harbours and rivers, as well as a pioneer in the logistical complexities associated with the maritime economy.
Moffatt & Nichol has played a major role in the evolution of the modern port. Specialising in maritime planning and engineering, Moffatt & Nichol are internationally recognised for providing innovative solutions to clients in the freight, passenger and energy industries.
For further information contact Karen Levy on +44 (0)20 3206 1062 or visit www.moffattnichol.com
Email : sales@planet-ocean.co.uk
Phone : +44 (0)8451 081 457
Website : www.planet-ocean.co.uk
Planet Ocean Ltd is a privately owned UK company located in central southern England and specialising in the provision of high quality, marine scientific instruments for research, survey and operations support.
Planet Ocean represents some of the world’s foremost manufacturers of oceanographic and marine meteorological equipment covering a wide spectrum of disciplines including; wave profiling buoys, data buoys, meteorological systems, tide and wave recorders, turbidity systems, Flow Cytometers, Fluorometer systems, acoustic plankton and ice keel samplers, acoustic modems, acoustic monitoring systems, mooring beacons, miniature temperature & salinity recorders, fish tags, nitrate sensors, phosphate sensors, radiometers, irradiance sensors and ocean observatories, Argo floats and gliders. Planet Ocean is also engaged in the design and manufacture of bespoke systems, and data buoys.
For further information please contact Terry Sloane on 08451081457 or visit www.planet-ocean.co.uk
Email : grant.maclean@sem.world
Phone : +44(0)1224 900122
Website : www.sem.world
At SEM we understand that processing "waste" and water safely and efficiently poses a major challenge for the Ports and Harbours market.
We are committed to delivering quayside waste reduction and water treatment solutions in partnership with your existing supply chain. Processing ballast, industrial and washdown water on-site minimises your costs and resources required for collection, handling, storage and disposal. Clean water can then be re-used on the quayside operation, or safely discharged to foul sewer or natural watercourse.
We can help you future-proof your business for a greener tomorrow.
For further information please contact our technical sales team on +44(0)1224 900122, sales@sem.world or visit www.sem.world
Email : sales@ses-marine.com
Phone : +44 (0)1634 295500
Website : www.ses-marine.com
Ships Electronics Services Ltd (SES) is a market leader in the supply, installation and maintenance of maritime communication and navigation electronics. Ships Services Electronic Ltd Operating from eight strategic sites in the UK, the company has over 40 years of experience within the leisure, fishing, commercial shipping, military shipping and offshore oil industries.
As dealer or distributor for many high quality manufacturers we have built an enviable reputation for customer service beyond expectations and are one of the few marine electronics companies to be certified to ISO 9001:2008.
For further information contact Colin Anderson on +44 (0)1324 666886 or visit www.ses-marine.com
Email : info@specialisedmarinesupport.com
Phone : 01852 300589
Website : www.specialisedmarinesupport.com
Specialised Marine Support Ltd (SMS) is an ISO 9001:2008 accredited and Achilles FPAL registered company based in Scotland providing support vessels to the offshore renewables and offshore construction industries throughout Europe. All vessels are road transportable.
We can supply:
11-14m Cabin RIBS,
10m Open RIBS
10m Fast Landing Craft
Evolution 38
For further details contact Iain Hill on +44 (0)1852 300 341 or visit www.specialisedmarinesupport.com
Email : FMDesk@speedyservices.com
Phone : 01942 277092
Website : www.speedyservices.com
Categories
· Tools
· New
· Access
· Lighting
· Survey
· Lifting
· Rail
· Compressors, Generators and Pumps
· Plant
· Heating, Ventilation and Cooling
For further information contact Neil Newsome on 01942 277092 or visit www.speedyservices.com
Email : info@v-p-s.com
Phone : +44 (0) 161 776 4534
Website : www.vpsveritas.com
From our beginnings in an Oslo laboratory as part of Det Norske Veritas (DNV), VPS has evolved into the largest bunker fuel testing company for ship operators in the world. Along our journey we have acquired the expertise to test oils of all types, for both marine and non-marine customers. In VPS we lead through innovation and in partnership with our customers we continue to evolve our testing methods, technologies and advisory services. Our innovative thinking will keep your business on the right side of change.
Based upon our 40 years of experience in testing oil of all types, we provide innovative, advisory services to the Marine, Power, Renewables and Industrial markets. We are at the forefront in providing testing and advisory services to support our clients’ goals of achieving sustainable operations, asset protection, preventative maintenance, plus environmental and legislative compliance.
Our Main Services: -
Marine Fuel Delivery Measurement via Bunker Quantity Survey
Oil Condition Monitoring -Lube and hydraulic/gear oil testing
Transformer Oil Testing - Power & Distribution
As the world’s leading fuel testing company, testing to ISO8217, with full ISO17025 accreditation, we have also innovatively developed, many proprietary additional tests which provide further fuel quality information, both pre-burn and post-burn, to further support our customers’ asset protection, human health and environmental compliance. As fuels continue to develop in order to achieve carbon-neutral/carbon-free status, we are committed to further innovative projects to provide testing and advisory solutions.
Bunker Quantity Surveys (BQS)
We pioneered impartial and independent Bunker Quantity Survey (BQS) services in 1987 and have since completed more than 140,000 BQS worldwide. Marine Bunkers are typically the largest contributor to the operational cost of a ship. As neither the buyer nor the seller are present to witness the quantity transfer and sampling procedures onboard, employing an independent surveyor can be key in avoiding quantity shortages, or sampling disputes. We were the first company to implement a worldwide Code of Practice for Bunker Surveying with continuing regular on-the-job quality assurance audits to ensure the highest level of integrity and service performance.
We provide asset protection through our Oil Condition Monitoring service by helping customers achieve maximum machinery and lubricant efficiency. This also protects the environment by ensuring efficient engine operation reducing GHG emissions. Through enhanced reliability users benefit from reduced operational and maintenance costs, improved equipment uptime, can drive maximum productivity from the machinery and its lubricant. It is a proven loss prevention technique that can form a key part of any condition-based predictive maintenance programme. Scheduled testing of lubricating oil provides information on the condition of the equipment, detecting contamination, giving an early warning system enabling the operator to act, avoiding costly maintenance and lost productivity.
Transformer Oil Testing (TOT)
Our TOT aims to prevent transformer failure ensuring consistent electricity supply for network providers and consumers. It is a proven loss prevention technique that can form a key part of any condition-based predictive maintenance programme. It works by testing the condition and quality of the transformer insulating oil to provide information on the condition of the transformer, providing an early warning system for preventative action. Given the nature of the industries we serve, we have a 24-hour emergency support hotline for urgent customer testing requirements:
With the largest and most complete database of marine fuel quality results available in the market today, we provide our customers with a digital portfolio of standard and customised data & analytics services. ​​Whether it is anticipating fuel quality trends before bunkering in a certain port or knowing which fuel suppliers deliver the highest quality fuel, we have a solution for you. ​
BENEFITS OF WORKING WITH US
Innovative Marine Fuel Testing Market Leader - VPS has 50% global market share for marine fuel quality testing creating the largest marine fuel quality database in the world.
Reliable & Consistent Results - VPS has ISO17025 accreditation for each laboratory and participates in many interlaboratory test schemes.
Objective & Independent - VPS provides unbiased reporting as we are independent and there is no conflict of interest from fuel/oil suppliers, OEMs or classification societies.
For further information contact Paul Parkinson on +44 (0)161 776 4534 or visit www.vpsveritas.com
Email : john@wallacemarine.co.uk
Phone : 07947 00 3337
Website : www.wallacemarine.co.uk
WALLACE MARINE LTD supplied, installed, tested & commissioned a new 15 ppm oily water separator as Glasgow Nautical College with Class for students of our future.
The new cadets from around the world will learn and operate this new piece of equipment as part of the training programme. |
We have installed (9) new Sperre air compressors with Lloyds class certification, please see pic attached. (JH120)
PNTL Vessels in Barrow In Furness.
Installations, repairs & suppliers genuine, oem & good quality replacement spares to suit all budgets.
Our sales team have over 30 years experience in the oil & gas offshore & marine industry.
We supply endless spares for these industries which service on/offshore markets worldwide. We can source all Oil/Gas machinery equipment with supplying unique spares.
We can offer genuine spares or good quality replacement equipment with Lloyds/DNV/Bureau Veritas/ATEX Class Certificates if required. The below link gives you further information.
If you have any new or existing projects that require our expertise, please feel free to contact us. |
We can also supply and install VACON variable speed drives. |
We can offer new emergency fire pumps with certificates.
We can offer all ships machinery & ships spare parts.
Our website visit our web page www.wallacemarine.co.uk
Please find below our scope of supply.
From this we stock almost all wear and tear parts, if you have any questions, please don’t hesitate to contact us.
Engines : ROLLS ROYCE, MAN, B&W, DAIHATSU, RUSTON, NOHAB POLAR, LISTER BLACKSTONE, CATERPILLAR, MAK, PAXMAN, SULZER, PIELSTICK, WARTSILA, YANMAR etc.
Turbochargers : BBC, NAPIER, HOLSET, MAN, KKK, Air Research Etc.
Compressors : Sperre, Hamworthy, Atlas Copco, Ingersoll Rand, Hatlapa, Tamrotor, Tanabe, JP Sauer Etc.
Refigeration & Air Con : Sabroe, Daikin, Bitzer, Bock, Mitsubishi, York, Carrier, Copeland Etc.
Separators / Centrifuges : Alfa Laval, Westfalia, Mitsubishi, Sharples Etc.
Pumps : ABB, Weirs, Sulzer, Shinko, Haskell, Hamworthy, IMO, Allweiller, Grunfos, Desmi, Haigh Macerator, Godiva, Comet, Girdlestone, Worthington Simpson, Gabarino, Rotan, Roto Pump, Lowara, Dowty, Jabsco, Jets, Whale Etc.
Engine Pneumatics : We are official Bosch Rexroth sales partner; Wabco (Aventics), Nabco, Kawasaki Etc.
Electric Motors : ABB, WEG, Brook Crompton, Stamford, Newage Etc
Safety Equipment : TYCO, CHUBB, Thermodyne, Graviner Kidde, Mobrey Measurement, Safety Suits, Fire Hoses, Fire Boxes, Breathing Air Eqpt.Safety Harness & Reels, Ladders, EVAC Chair, Tank Monitors
Mooring Eqpt : Winches, Chain, Anchors, Wire Cable, Shackles, Rope, Rope Ladders Etc.
Supply/Installation : Variable Speed Drives VACON DRIVES, SIEMENS & many more manufactures.
Also Galley Range Eqpt, Sewage Plants, Bow Thrusters, Generators, Emergency Fire Pumps Etc.
We supply & install ships machinery.
For further information contact John Hayes on 07947 00 3337 or visit www.wallacemarine.co.uk
Email : marc.sharples@zumtobelgroup.com
Phone : +44 (0) 1388 420 042
Website : www.zumtobel.com
We are an international lighting group and a worldwide leader and trusted name in the design and manufacture of innovative lighting solutions, luminaires, lighting management systems and lighting components for all interior and exterior applications. We can offer our customers a ‘one stop shop’ for lighting projects, providing everything from scheme design and a comprehensive range of quality products for every application, to installation and commissioning – from concept, finance support and completion. We strive to provide our customers with the best possible cost effective and energy efficient lighting scheme and our ZGS (Zumtobel Group Services) was launched to take the project management of turnkey lighting solutions a step further and provide the ultimate service. We can manage the entire process for you from planning and project management through to commissioning and even maintenance creating an all-in-one service package, ready to go. With our internationally established brands, Zumtobel, Thorn, Tridonic, and acdc along with Zumtobel Group Services (ZGS), the Group provides a single partner who can offer competencies in project development and management as well as actual implementation. |
|
|
For further details contact Marc Sharples on |
|
|
+44 (0) 1388 420 042 / +44 (0) 7798 800 515 or visit www.zumtobel.com |
|
We accept: Credit Cards, Debit Cards, Net Banking, Cash/Bank Transfer, Demand Draft/Cheque, Money Order, Paymate, ITZ Cash Card. We support all leading banks. 100% Safe & Secure.