With increasing demands on function integration and cost efficiency, plastics as a material for tank production are becoming increasingly important. In addition, designers expect almost unlimited creative freedom.

• Valves
• Solenoid Systems
• Explosion Proof Valves
• System Solutions
• Power Packs
• Connecting Plates & Manifolds
• Accessories
• Pressure Switches
• Hydraulic Drives
• Filtration
• Tank Solutions
• Quick-Connect System
• Fluid Management
• Sensors & Measurement
• Service

For further details contact Keith Windebank on +44(0)1709839300 or visit www.argo-hytos.com

Our Product Specialities Are:

§  Sea Going – Heat Exchanger Cooled Marine Propulsion Engines      from 10 to 150 bhp.

§  Inland Waterways – Keel Cooled Marine Propulsion Engines from 14 to 115 bhp.

§  Beta – Kubota Based Marine Generating Sets from 4 to 50 kVA.

§  Beta – Baudouin, Cummins, Perkins, Sabre, Scania or Volvo Based Marine Generating Sets from 30 to 1,000 kVA, which are available to class.

For Further Information Contact Andrew on +44(0)1452723492 or visit www.betamarine.co.uk

Marine & Offshore

The value of uptime – clean & dry oil at all times
C.C.JENSEN has over six decades of experience and is the global market leader in offline oil filtration in marine and offshore applications.

We know the importance of uptime and how to reduce the risk of expensive breakdowns. With CJC® Oil Filters installed on your vessel or rig, you effectively reduce oil-related problems, and you ensure always having continuous clean & dry oil providing the best operation and efficiency, giving you the highest earnings.

Improve your vessels’ and rigs’ up-time and extend oil lifetime
Having continuous oil maintenance installed, you reduce oil-related problems on your engine, thrusters, bearings, gears, winches, cranes etc.

CJC® Oil Filters constantly remove particles, water and oil degradation products from oil, resulting in reduced wear on components in many different marine and offshore applications. This extends the lifetime of the lubrication and hydraulic oil with a factor 3-4, improving your uptime. We clean diesel to a level optimized for common rail technology.

Technical expertise
Our technically competent sales engineers in the CJC® Marine and Offshore team, actively apply this knowledge in their day-to-day work with many different shipowners and operators, giving advice on selecting the right solution.

We invite you to learn more about our specific system solutions. Please select your preferred segment in the menu to the left.

Customer Cases, learn how other customers benefit with CJC, please download from below Application Study library:

Supply Vessels

Container Vessels

Passenger & Ro-Ro Vessels

Tugs

Fishing Vessels

Bulk Carriers

Rigs & Drillships

Marine Engine Lube Oil Treatment Program

For further information contact Sandy Mitchell on +44 (0)1388 420721 or visit www.ccjensen.com

Established in 1994, we are a family owned business that are leading the field of managing liquid wastes and sludge's through Scotland.

We provide innovative waste management solutions, excellent customer service and deliver added value with our compliance to ISO 9011:2015, ISO 14001:2015 & OHSAS 18001:2007 ensuring safety and the reduction of environmental impact.

Our guarantee is to recover as much material as legislation will allow for re-use or re-processing, thus reducing your eco footprint.

For further information contact Brenda Horne on +44(0) 1779 477311 or visit www.directwaste.com

Enerpac is a global market leader in high pressure hydraulic tools, controlled force products and solutions for precise positioning of heavy loads.

Enerpac manufactures products, from the smallest hydraulic cylinder to complete computer-operated lifting and positioning systems, to provide our customers with innovative solutions that increase productivity, are cost effective, and make work safer and easier to perform.

For further details visit www.enerpac.com or call

01670 501 000

Eurovia Roadstone are licensed to handle Coal off –loading and storage of Bulk Cargoes such as Aggregates, Salt, etc. 

Stothert & Pitt Crane Grab discharge to 3.5 tonne capacity. Loading & unloading facility available 24 hours a day, 

7 days a week

For further information contact Paul Warwick on 0208 593 2245 or visit www.eurovia.co.uk

Hydrobag is a company based in the Netherlands which formed in late 2018.  Hydrobag develops and produces ecological solutions and safety products.

LEAK STOP GUN

The Leak Stop Gun is one of the products that is produced and sold by Hydrobag B.V

With the LeakStopGun we can close sudden erupted holes and leaks in a matter of seconds, with high precision and efficiency.

A must have for emergency services like Fire Department, Harbours and Police.  For on every terrain with storage tanks and on board for ships.  In short product id a do it all with closing holes.  Did a pipe burst or is a storage tank leaking?  The Leak Stop Gun is the answer to your unwanted leak!

At the moment there are 2 models of the Leak Stop Gun.  The first model is the Leak Stop Gun 150, this particular tool can close of holes for a maximum of 15 centimetres wide.  The second model is the Leak Stop Gun 400, which can close of holes for a maximum of 40 centimetres wide.  Further technical data can be found on the website or by contacting the Hydobag company contact person.

For further information contact Lelo Tibana on +31 851 305 411 or visit www.hydrobag.nl

A trusted partner in the supply of industrial and pneumatic equipment to the fluid power market, we remain strong in providing a wide range of products with technical support and a friendly, helpful and efficient service.
 
We work closely with valued customers across the UK and reliable local and international suppliers to understand specific needs and technological advancements around the world, Each year we produce an extensive product catalogue to serve the buying needs of our customers and the end user. This catalogue is available in a printed edition for our customers to purchase and all products are available to order online through our company website.

Founded in August 2003, Indequip is based in the North West of England supplying to a network of approved distributors, and additionally to a wide variety of end user customers across the UK. Originally based in St Helens, over the last 14 years, the company has quadrupled its team to 17 personnel and is now located in a newly refurbished premier office space in Skelmersdale with 150,000 sq ft onsite logistics centre.

Interpump Hydraulics are leading UK suppliers of hydraulic and mechanical products and are a member of the international Interpump group.

If you are looking for a friendly and helpful industrial rubber products supplier with good product knowledge and excellent customer service, then you’ve come to the right place.

We supply a vast range of quality items including rubber sheet and an array of fabrications made from premium grade elastomers including silicone and Viton® – many of which are available for next day delivery.

Having dealt with the rubber needs of a variety of industries for over 30 years, we have plenty of experience too.

For further information contact Richard Lewthwaite on 0777 712 400 or visit www.j-flex.co.uk

JBA Calibration Services are a family run business that specialize in the calibration industry.  Their main calibration laboratory and offices are based just outside Hull, East Yorkshire.  They have the ability to calibrate a wide variety of instruments ranging from fixed gas detectors and portable gas detectors to UTI Meters and Tank Radar Level Sensors.

The Engineers specialize in the Marine Industry in almost every circumstance equipment can be supplied, repaired, serviced and calibrated and labelled on your vessel, thus reducing the vessels downtime which is generally associated with sending equipment off site to a laboratory.

Although the majority of our shipping clients are UK based, here at JBA Calibration we have also partnered with Calibration Laboratories across the globe and have technicians available to travel worldwide at short notice.  All on site calibration services are preformed with tractability back to national standards giving you that clarification.

Jetrac®

Our engineers are able to conduct varying levels of onboard surveys to establish baseline information, this will determine the material state for every Flexible Hose Assembly (FHA) onboard a particular vessel or asset.  The main benefit is to highlight damaged assemblies eliminating any potential risk to personnel, production and environment in the event of hose failure. 

This service-critical data is stored and accessed through our Jetrac® system which is a web accessible database ensuring an accurate and up-to-date record of all Flexible Hose Assemblies. 

Having a Flexible Hose Asset Management System in place provides accurate data to plan maintenance and ensure equipment can work to its maximum capacity.  It can also be used to filter for any FHA’s due for change out in accordance with the customers’ requirements.

Approved and accredited by the British Fluid Power Association (BFPA), our engineers can manufacture and test a wide variety of hoses to meet specific customer requirements.  We hold / manufacture hoses to Defstan 47-32 for UK MOD and can also manufacture and supply a wide range for commercial use.  Please see below for the range we can offer:

• 1WB and 2WB, 4SP, 4SH, R13 and R15 (braid & multi spiral range), PTFE Hoses,     Stainless Steel hoses and Thermoplastic hoses.
• Bore size 3/16” to 2” as standard but we can also accommodate any specific customer requirements.  For eachhose that we manufacture we can also provide a full technical drawing.

All hoses are pressure tested at our facility to the required pressures for the hose application, we can also offer mobile testing anywhere onsite at customer locations / facilities.  All our surveyors are competent hose manufacturers and fitters and can carry out a variety of installation/change out projects.  

For further information contact Sara Blake on 01243 956992 or Lee Greenfield on 01243 956991 or visit www.jetrac.co.uk

 Modal Training is an innovative and market leading new £7 million training centre built to support the ports, energy and logistics sectors. Situated in the port town of Immingham, along the M180 corridor, the centre is equipped with state-of-the-art training facilities for ROAD, OFFSHORE, WIND ENERGY, MARINE SIMULATION, CRANE SIMULATION, PORTS and MARITIME

Oldham Seals Ltd has been designing and manufacturing polymer engineered products for the naval, marine  and civilian shipping industry, oil and gas and traction industries since 1964. We offer a unique design with a diverse and comprehensive range of our Jetpac® products and services.

Now Testing, Installation, Certification , Maintenance & Inspection of Hosing & Hose assemblies available

For further information contact Lee Dodd on +44(0)1243 782296  or visit www.oldhamseals.co.uk

Powercare Electrical Services was established in 1999 as an outdoor lighting company providing general amenity lighting, car parking lighting, Christmas and festive lighting, airport lighting including towers and high masts for specific projects such as railways, docks, football stadia and school sports fields. It is now one of the North’s most experienced private external lighting companies.

Our approach is to see through each project from its inception onwards, which means that you can rely on our support from the initial consultation meeting through to design, installation and any ongoing maintenance work that may be required. Throughout the process, our core values of reliability, component quality and function are the driving force behind everything we do, ensuring that the products that we recommend, install and maintain comply with the highest industry standards, and are sourced from UK based suppliers. In addition, as a consultant with a great deal of experience in the field of LED lighting applications, Powercare Electrical Services has installed LED lighting in environments such as airports, hotels, hospitals and universities, as well as restaurants and retail outlets.

Scania is one of the world’s leading manufacturers of 

trucks, buses, industrial and marine engines with an 

excellent reputation and highly loyal customers. 

Scania`s six- and eight-cylinder marine engines, ranging 

from 294 kW to 735 kW are the most popular Scania marine 

solution, featuring an array of flexible options regarding 

ratings, equipment, transmissions and instrumentation. 

Every year Scania builds more than 80,000 engines on it 

modular five-, six- and eight-cylinder platform. Scania 

engines are found operating in many different conditions 

around world in truck, bus, industrial, marine and power 

generation applications. 

For further details contact Paul Cowell or David Bamber 

Telephone : 01908 210210 or visit www.scania.co.uk 

TELEPHONE +44(0) 1908 210210

Seetru are manufacturers of safety relief and other special purpose ancillary valves for a wide range of compressed air, industrial gas, refrigerants, powder, steam, liquid and liquefied gas applications. We also manufacture liquid level gauges, primarily of two types; sight gauges and magnetic float by-pass gauges. 

Seetru is a UK based manufacturing company with strong domestic and international sales, both direct to the customer and through our extensive distributor network.

Seetru are manufacturers of safety relief and other special purpose ancillary valves for a wide range of compressed air, industrial gas, refrigerants, powder, steam, liquid and liquefied gas applications. These valves meet important international standards.

Seetru also has a wide range of special purpose valves, which are largely for the compressed air industry and for medium sized industrial diesel engines. These include minimum pressure valves for screw type compressors and air starting valves for medium size industrial and marine diesel engines. 

Seetru liquid level gauges are primarily of two types, sight gauges and magnetic float by-pass gauges. Many of the gauges are direct reading though most have optional electronic remote reading systems and computer interfaces. The range includes the Quickmount, Seemag and CPI gauges for industrial and chemical applications and the Seeflex and Seemag for marine applications. 

The company’s substantial design and development department, which includes TÜV approved testing facilities, enabling us to provide extensive bespoke design, advisory and manufacturing services to develop or adapt individual products for new applications.

For further information contact Nick Smith on +44(0)117 930 6100 or visit www.seetru.com

Established in 1972, Tom Parker Ltd is a family-run distribution company. With branches in Preston and Basingstoke, we are perfectly equipped to serve the fluid power requirements of the whole of the UK. Tom Parker Ltd provides a comprehensive range of products, combined with superior levels of service - making us the name to trust in Pneumatics and Hydraulics.

Wärtsilä UK Ltd is responsible for the group’s activities in the UK and Ireland. We cover Automation, Reconditioning, Propulsion, Training, Ship services, Seals and Bearings and Electrical and Machinery maintenance, Operations and Management. Wärtsilä in the UK supplies ship propulsion solutions and decentralised power generation plants Our Service businesses support all customers throughout the lifecycle of their installation. We provide complete engine and related systems services, covering both Wärtsilä and other engine makes. Other Company Addresses:Glasgow (Propulsion Services), Wärtsilä UK Ltd, Inchinnan Business Park, Cartside Avenue, Paisley, Renfrewshire, PA4 9RX. Aberdeen (Engine Services), Wärtsilä UK Ltd, 11a Peterseat Drive, Altens, Aberdeen, AB12 3HT. Montrose (Electrical & Automation Services), Wärtsilä UK Ltd, Harbour Building, South Quay, Ferryden, Montrose, DD10 9SL. Dublin (Engine Services), Wärtsilä UK Ltd, 54 Broomhill Drive, Tallaght, Dublin24, Ireland For further Details please contact Fraser Scott ... Telephone:01489 550050

William Nicol Ltd specialises in providing bulk liquid and powder transport services and we operate throughout the UK and Europe.We also provide secure bulk liquid storage facilities and our industrial services division offers a wide range of specialist services such as industrial and marine tank cleaning, waste oil recovery and waste disposal.