UK Ports

Write Us For Your Questions

Call Us For Your Questions

(+44) 0207 125 0491

Marine Engineering and Renewables

Get Direct Access to the most RELIABLE, TRUSTED UK PORTS SUPPLIERS Comprehensive Resource of Opportunities
From UK Ports Authorities to Ports Services

A&P Falmouth Limited

Email :
Phone : +44 (0)1326 212 100
Website :


Shiprepair and conversion, Offshore Oil & Gas, renewable energy, large steel fabrication.



A&P Falmouth, part of the A&P Group, is superbly situated

on the gateway to the English Channel, in the third largest,

natural deep water harbour in the world.  A&P Falmouth

makes the most of its natural resources and convenient

location, close to the Western Approaches and shipping

lanes of Northern Europe.

Shiprepair Facilities

  • Three large graving docks
  • (252.8m x 39.6m/220.9m x 26.8m/172.5m x 26.2m)
  • Deepwater craned berths 
  • Afloat repairs in Falmouth bay
  • Slops Reception facilities
  • Class approved for in water surveys
  • Accommodate vessels without gas freeing
  • Stores reception facility

Falmouth has the capacity to accommodate vessels up

to 100,000 tonnes, with workshops and resources, offering

onsite engineering, fabrication, electrical, pipework,

plumbing, and painting.  A well developed local

and national supply chain provides all requirements

for marine specialists and OEMs. A&P Falmouth

has highly skilled personnel and well equipped

workshops, providing the capacity to resource,

facilitate and manage the most complex of

marine engineering projects, in a safe and

organised environment.

Port Services

Falmouth is a busy working port with deep water berths,

cranes and a full range of equipment capable of handling

bulk, break bulk and containerised cargoes.  Located

within the docks are over 30 companies, which provide

a full range of services including stevedoring, towage,

bunkering, ship’s agency, port health, diving services,

local surveyors, chandlery and boat services. The

Port also has many cruise calls with over 20,000+

  passengers annually, who see Falmouth as

the gateway to Cornwall and its beautiful

attractions and scenery. 


Ship repair and conversion

Drydocking and conversion of Commercial

vessels, Military vessels, Oil and Gas and

Renewable Energy construction

and service vessels.


Cargo handling and storage in Falmouth

Pontoons and shore side access systems

Design and fabrication of steel and concrete pontoons

and bespoke access systems for ports, and marinas.

For further details contact Drystan Jones

on telephone +44 1326 212 100 or visit

Aqualis Braemar Ltd

Email :
Phone : +44 (0)20 3142 4100
Website :


Braemar Technical Services providing a broad range of specialist services to the Marine, Offshore, Energy, Shipping and Insurance sectors. 

These include Adjusting, Engineering & Naval Architecture, Marine Surveying & Consultancy, Expert Witness, Offshore Energy & MWS and Response services.

Braemar Technical Services has a significant international presence with over 40 offices located worldwide in both established and emerging markets. This is reinforced further by the additional office locations of our Shipbroking and logistics divisions within Braemar Shipping Services plc.

For further information contact Paul Hill on +44 (0)7711 489 246 or visit

Ashcourt Group Ltd

Email :
Phone : 01482442288
Website :

The Ashcourt Group is a Hull based family run organisation which has expanded significantly since its humble beginnings in 2009 and now has over 300 employees.
The Ashcourt Group have invested significantly in its people. Employing highly skilled and experienced individuals from a range of backgrounds means we can deliver the results our clients expect.

Image result for Ashcourt group logo


Atkins Limited

Email :
Phone : +44 141 220 2222
Website :

 Atkins is at the forefront of the offshore renewables revolution, providing robust concept and detailed engineering design and owner’s engineer services in the wind, wave and tidal energy sectors.

For further details contact John Foley on Telephone  +44 141 220 2222 or email 


Email :
Phone : 01489 889 260
Website :


Our customers live in a world of ever-increasing change: growing compliance, new global competitors, the pressure to do more with less, ever faster innovation cycles and less time to exploit market positions or new technologies. BMT brings domain experience coupled with management, engineering, science and technology know-how to help our customers compete in this world of accelerated change.


BMT is an independent, multi-disciplinary consultancy delivering solutions to industry, commerce, policy makers, regulators and public-sector operators. We offer specialised expertise to solve our customers’ most complex challenges in a wide range of markets.


In the maritime space, BMT provides through-life advisory, design and engineering services. Through our simulation and modelling expertise we specialise in the analysis of environmental conditions for offshore and coastal design and operations, provides bespoke services in ship navigation and manoeuvring simulation, mooring analysis, emergency response and search and rescue. The company employs mariners and industry experts in oceanography, hydrodynamics and naval architecture.

Braemar Technical Services Ltd

Email :
Phone : 0203 142 4300
Website :

Braemar Technical Services Ltd is a leading international marine surveying and technical consultancy, operating from a worldwide network of offices. The company incorporates the world-renowned casualty expertise of The Salvage Association and consultancy expertise of Murray Fenton. Braemar SA are also Skuld P&I correspondents. For further details contact: Charlotte Ward on Telephone: 0203 142 4300

Braemar Technical Services Ltd.

Email :
Phone : +4402031424100
Website :


Braemar Technical Services providing a broad range of specialist services to the Marine, Offshore, Energy, Shipping and Insurance sectors.


These include Adjusting, Engineering & Naval Architecture, Marine Surveying & Consultancy, Expert Witness, Offshore Energy & MWS and Response services.


Braemar Technical Services has a significant international presence with over 40 offices located worldwide in both established and emerging markets. This is reinforced further by the additional office locations of our Shipbroking and logistics divisions within Braemar Shipping Services plc

Buttimer Engineering

Email :
Phone : +441217671388
Website :


Buttimer is a diversified mechanical engineering firm specialising in bulk materials handling solutions and high-quality steel fabrication. From one-off design, fabrication, installation or repair works, to full turnkey projects, Buttimer Engineering draws on skilled teams to deliver the service that our clients require.


From fabricating pressure vessels, to shut-down maintenance at a power station; from turnkey facility design to the supply of individual pieces of equipment, Buttimer bring our problem-solving ethos to each job and partner with our customers to cost effectively deliver the required performance.

For further details contact Michael McNulty on +44 121 767 1388 or visit

Clever Marine Services Ltd

Email :
Phone : +44 (0)1624 835123
Website :

Clever Marine Services, Operational & Management services for the shipping industry  

Clever Marine Services Ltd is a Isle of Man based marine service provider, established 2009, with its dedicated core team and a pool of up to 300 experts we can employ on contractual basis we are prepared to tackle any problem you may have.  

Our core team offers our clients qualifications as Marine Engineers & Mechanics, Master Mariners, Superintendents, Surveyors and NDT Technicians with over 20 years’ experience in the Marine Industry. We are approved Ultrasonic Thickness Measurement (UTM) providers by the 6 leading IACS Class Societies (DNV GL, ABS, RINA, BV ) and our staff is qualified in NDT Technologies.    

Our core team currently holds qualifications to carry out Crack, Lamination and Material inspections with LPI, MPI as well as UT. We can work to standards specified by clients or can provide ISO, EN, BS standards for the applicable test. This gives us the flexibility required to work UTM & NDT testing in different industries. 

For further information contact Sven Fromm on 01624 835123 or visit 

Dron & Dickson Ltd

Email :
Phone : +44 (0)1224 874554
Website :


Dron & Dickson are recognised as market leaders in the supply & maintenance of hazardous area electrical equipment. Working together with our clients, our Engineering Services Management and Wholesale divisions offer bespoke solutions incorporating the very latest industry standard and safety legislation.


Our objective is to exceed our clients’ expectations, by providing services that are innovative; cost effective and based on Quality, Experience and Diligence. We are able to offer a complete package that draws on the experience of our highly trained staff. A complete cradle to grave solution.


For further details contact Lee Hart on Telephone: +44 (0)1224 874554 or email:   




Dublin Port Company

Email :
Phone : +353 1 8876000
Website :

Dublin Port Company is a self-financing, private limited company by the State, whose business is to manage Dublin Port, Ireland’s premier port. Dublin Port Company provides world-class facilities, services, accommodation and lands in the harbour for ships, goods and passengers.

For further information contact Charlie Murphy on +353 1 8876000 or visit


Email :
Phone : +44 20 3206 5200
Website :

ERM is a leading global provider of environmental, health, safety, risk and social consulting services. With sustainability at the heart of both our services and how we operate our business, we are committed to providing a service that is consistently of the highest quality. New management & leadership development services available For further details contact Bruce Davidson on + 44 20 3206 5200 or e-mail

Forte Maritime Ltd

Email :
Phone : +44 1642 200076
Website :


Forte Maritime Ltd is a UK based Marine and Technical Consultancy lead by Stirling A. Elliott, who is a qualified Marine Engineer with over 35 years’ experience in the marine, offshore,  energy and renewables industries.

Forte Maritime offers a specialist service to clients utilising our comprehensive knowledge and experience of the industry.  Our company can draw upon a dedicated team of experienced Engineers, Marine Specialists, Project Managers, Naval Architects and HSEQ specialist who have worked in various disciplines and multiple roles. Listening, flexibility and innovation are our strengths to ensure we meet your requirements.


Forte Maritime has developed a track record in providing a comprehensive range of services to a diverse client base. Forte Maritime believes in delivering a professional and quality service which is the key to our success and customer satisfaction. 


Marine Engineering


Projects &













Gardiner & Theobald LLP

Email :
Phone : 0207209 3000
Website :

Gardiner & Theobald is an independent construction and property consultancy working across all sectors of the built environment. We focus on minimising risk and creating opportunities to maximise the value of our clients’ developments and property assets. We deliver Project Leadership, Commercial Success, Construction Excellence and Specialist Consultancy working across all sectors of the built environment.


We have particular expertise in providing cost management and project management for ports, harbours and marine projects as part of our Major Projects and Infrastructure sector. Our team of specialist experts create a unique pool of talent to support a diverse range of clients and the commonalities we find between major projects allow us to add value through cross fertilisation of ideas, sharing of best practice and drawing upon the extensive benchmarking data that underpins our advice. Projects that we deliver are often large scale and complex and have significantly different requirements, so bespoke solutions are developed for each project with flexibility built-in.

For further Details contact Gerry Ferguson on 02380 574 543 or visit

Goltens UK Ltd

Email :
Phone : +44 (0)1475 744655
Website :

2 and 4 stroke diesel engine overhaul/service/repair. In-situ machining (Crankshaft Grinding, Line Boring, etc.) and Green Technologies (Ballast Water Treatment Systems - Retrofits); General Spare Part supply.


Email :
Phone : 07584700056
Website :


Graham is a privately-owned company with an impressive history built on integrity and responsibility.The business became incorporated as a private limited company in 1955.The company has grown steadily and significantly since then to become a leading player in all areas of construction throughout the UK and Ireland.


GRAHAM now operates from 23 regional offices in the UK and Ireland.                                    For further details contact Malcolm Loader on                                                                        Telephone : 07584700056 or visit

GRP Grating Systems

Email :
Phone : +44 (0) 844 884 2616
Website :

GRP Gratings supply GRP grating and composite products to the UK market place. Walkways, pontoons, marina decking, ladders, structures and a full design and installation service throughout the UK.

Our speciality products for the marine industry are Mini and micro mesh grating which is widely used where there is a requirement for non slip capability. GRP products provide an efficient and cost effective solution all walkways, flooring and decking areas requiring long term performance in very aggressive and corrosive/chemical environments. Unlike any metal grating, moulded GRP panels can be easily cut and fabricated on site using only hand tools. The ease of handling makes it ideal for difficult to access areas. We like to think ourselves as a unique one stop shop facility offering customers outstanding service and quality products.

For further details visit or email

Harland and Wolff

Email :
Phone : 02890 458 456
Website :

 Harland and Wolff Industries Limited is a leader in design engineering, ship repair & conversion, manufacturing, assembly and logistical services for renewable energy projects.

For further information please contact Lisa Fairley on 02890 458 456  or visit


Herbosch- Kiere

Email :
Phone : +44 (0)208 987 9995
Website :


Herbosch-Kiere is a leading European specialist in Marine Construction, Maritime Salvage, Demolition & Heavy Lifting. Herbosch-Kiere’s primary focus is on projects with a high degree of technical difficulty or logistical problems where our engineers can provide safe, innovative and cost-effective solutions

 For further details contact Judy Turley

 Business Development on Tel: 0208 987 9995,



Houlder Limited

Email :
Phone : +44 (0)20 7357 7317
Website :


Green Marine Engineering & Design

Houlder ltd  is a fully independent marine design and consultancy group active in Marine, Offshore Oil & Gas, Renewables, LNG and Defence markets. We provide expertise in ship design, bunkering and LNG transfer, port design consultancy, caisson design, feasibility studies, expert witness, ship survey and analysis and plan approval. Contact us to find out more about our proven track record of delivering innovative designs with a focus on meeting current and future environmental legislations. We have experience in LNG bunkering and transfer infrastructure, LNG conversion and hybrid propulsion, engine scrubber installation and ballast water treatment system integration design and retrofitting,

Houlder ltd is an independent, employee owned offshore consultancy operating throughout the UK and internationally. You can read more at    

Contact Jamie Sinclair +44 (0)23 9287 5277 to discuss your project requirements.

Hythe Shipyard

Email : robhammond@hythe
Phone : +44 7526 168 775
Website :

Hythe Shipyard operates a heavy slipway for commercial and non-commercial   vessels up to 55 metres, plus a  100 Ton travel hoist.

Our professional and experienced team can also provide solutions for emergency and short-notice haul-outs for RIBS, leisure yachts, workboats, barges and superyachts. 10,000m2 of undercover vessel storage is available for short-term routine maintenance to long-term build/refit projects. Alongside and deep-water moorings are also available for vessels 10m to 100m, with easy and unrestricted access to the Solent.

For further information contact Rob Hammond on +44 7526 168 775 or visit

Impalloy Ltd

Email :
Phone : +44(0)1922 714 400
Website :

Sacrificial Anodes for the sacrificial protection of immersed steel using aluminium and zinc alloys have been supplied Worldwide by Impalloy for over 40 years.

We are situated some 20 minutes from the M6 and M6 toll, within 40 minutes of Birmingham airport and within walking distance of local trains. This ideal location gives us simple communications being centrally located in the UK.

An investment in our fabrication facilities has provided an unrivalled resource in the area, with pipe bending to 4″ of 12 metre lengths, brake press, plate rollers and machining. Weld qualification to 15mm in 30mm parent materials complements this extensive facility.

Sacrificial anodes are used on pipelines, platforms, subsea structures; wind turbine foundations and monopiles, wave and tidal generators; quay and harbour walls, jetties & pontoons, dock gates; ships and boats ulls, ballast, grey and potable water tanks; power station intake screens and storage tanks. In short anywhere steel is immersed in water, anodes will be found.

We specialise in manufacturing larger platform, bracelet and flush mounted Anodes, in sizes up to 4000Kg to the exacting standards of the offshore industry. Our long track record is proof of our expertise in this area.

Extensive testing using modern equipment is backed up by our DNV certification of our alloy.

Inland and Coastal Ltd

Email :
Phone : 01343 813233/815382
Website :

Inland and Coastal Marina Systems specialise in the design, manufacture and installation of marinas. Our clients include local and regional Government, Port and Fishery Authorities, Marina Operators, Sports and Recreational Clubs, Development Consortiums, Consulting Engineers, Architects and Main Contractors.


For Further Details Contact on 01343 813233 or visit


Email :
Phone : +44 (0) 29 2009 0099
Website :


We’ve got experience and competence to carry out comprehensive shipyard projects. Our activities adhere to the rule of offering our customers across the board services while relieving them of time and price risks.

We pay high attention to proper planning, use of cutting edge technical solutions and keeping deadlines while maintaining an adequate and competitive price level. Fulfillment of regulations pertaining to safety at work and environment are treated as a first priority.

The portfolio of our customers consists of ship owners, new build and repair shipyards as well as businesses from the off-shore industry (operators of rigs and supply vessels).

The scope of our services comprises of, but is not limited to:

§  Hull construction and assembly

§  Modification and adaptation of ships and rigs

§  System installation and start-up

§  Assembly of pipe installations

§  Welding works

§  Electrical works

§  Project management.

We operate globally through our international network nad work on 24/7 basis with very short mobilization times for both personnel and equipment. We can perform our tasks both at the shipyards and during vessel’s voyage or at-sea operations.


Inter-Marine UK Ltd

Email :
Phone : +4401305470190
Website :

Inter Marine - Shipping: Shipyard & voyage repair – a core business strength, our high-quality repair works can be undertaken anywhere in the world, including at sea. Conversion & mobilisation – upgrades, alterations, changes of purpose; we can handle any scale of project on your behalf. Ship building – we can apply our fabrication skills to new build ships or modular projects, from steelwork to out-fitting.

For further information contact Mark Bowden or David Bailey on+44(0)1305 470190 or visit

J T Mackley & Co Ltd

Email :
Phone : +44 (0) 1273 492212
Website :

Business Description At Mackley, we understand the requirements and processes needed for high quality and safe engineering for ports and harbour projects. Overall layouts Breakwaters Berthing facilities Navigation channels


Email :
Phone : 01642 334000
Website :


James Aiken Engineering Solutions Ltd

Email :
Phone : 01224 740842
Website :

James Aiken Engineering Solutions is one of Aberdeen’s oldest companies having operated in the heart of Aberdeen since 1826.

Specialising in precision engineering and sheet metal fabrication, the company worked from its Wellington Street premises near Aberdeen Harbour for the last 38 years.

After significantly outgrowing its harbour-based office and workshops, James Aiken commenced a new chapter in its history in 2015 after it cut the ribbon on a new £1million base in the city’s Bridge of Don.

A dedicated facility of 12,500 sq ft offers both fabrication and machine shops under one roof. The facility is a blend of office and workshop space complete with overhead cranes, ample yard space and extensive car parking provision.

The company is headed up by directors, Neil Jolly and George Paterson, who both began their careers as apprentices with the business more than 25 years ago. Nearly a third of the team have worked for the company for the last 30 years.

James Aiken is part of Jasmine Holdings.

James Aiken Engineering Solutions has a broad customer base which covers bespoke machining and fabrication work for the on and offshore oil and gas industry, including subsea and marine works. Our engineering and fabrication teams also manufacture plant and equipment for the onshore chemical industry as well as the power generation sector.

Food processing plants are another sector where our machine, fabrication and installation skills have been utilised in the design and build of tanks and other types of bespoke equipment.

James Hutton Limited

Email :
Phone : +44 1382 568568
Website :

James Hutton Limited provides analytical chemistry services for industry. Marine sediment analysis must be undertaken prior to any disturbance of the sea bed to determine levels of contamination and potential impacts. James Hutton Limited supports customers to ensure full environmental compliance for marine activities including dredging, disposal of dredged materials, construction, deposits/removals of substances or objects onto/from the sea bed.  James Hutton Limited also offers a number of accredited techniques to analyse water for inorganic and organic pollutants as well as extensive mineralogy expertise. Our analytical solutions are tailored and unique to each customer.  We take pride in being world-leaders, integrating techniques to find the answers businesses need, with unrivalled accuracy.  James Hutton Limited also offers a number of accredited techniques to analyse water for inorganic and organic pollutants as well as extensive mineralogy expertise.


Jetrac Limited

Email : /
Phone : 01243 956992 / 01243 956991
Website :


Our engineers are able to conduct varying levels of onboard surveys to establish baseline information, this will determine the material state for every Flexible Hose Assembly (FHA) onboard a particular vessel or asset.  The main benefit is to highlight damaged assemblies eliminating any potential risk to personnel, production and environment in the event of hose failure.  

This service-critical data is stored and accessed through our Jetrac® system which is a web accessible database ensuring an accurate and up-to-date record of all Flexible Hose Assemblies. 

Having a Flexible Hose Asset Management System in place provides accurate data to plan maintenance and ensure equipment can work to its maximum capacity.  It can also be used to filter for any FHA’s due for change out in accordance with the customers’ requirements.

Approved and accredited by the British Fluid Power Association (BFPA), our engineers can manufacture and test a wide variety of hoses to meet specific customer requirements.  We hold / manufacture hoses to Defstan 47-32 for UK MOD and can also manufacture and supply a wide range for commercial use.  Please see below for the range we can offer:

  • 1WB and 2WB, 4SP, 4SH, R13 and R15 (braid & multi spiral range), PTFE Hoses,     Stainless Steel hoses and Thermoplastic hoses.
  • Bore size 3/16” to 2” as standard but we can also accommodate any specific customer requirements.  For eachhose that we manufacture we can also provide a full technical drawing.

All hoses are pressure tested at our facility to the required pressures for the hose application, we can also offer mobile testing anywhere onsite at customer locations / facilities.  All our surveyors are competent hose manufacturers and fitters and can carry out a variety of installation/change out projects.  

For further information contact Sara Blake on 01243 956992 or Lee Greenfield on 01243 956991 or visit

JW Auto Marine Ltd

Email :
Phone : + 44 (0)1328 852316
Website :

Founded in 1972, JW Automarine are world renowned as an established leading manufacturer of Underwater Lift Bags, Buoyancy Systems, Proof Load Test Bags, Strops, Helium Bags, Flexible Tanks, Flexi-Tainers, Flexi-Dams and specialist bespoke products. Synonymous with quality and performance and reputed on fast delivery.

JW Automarine lifting bags pass rigorous quality control standards and are inspected and registered to ISO 9001: 2015 requirements, to Defence Standards 05 - 91 and to IMCA D016 Rev 4 GUIDELINES. Repair and Test Procedures for lifting bags.

For further information contact Chris Dawson on + 44 (0)1328 852316 or visit


Kaymac Marine & Civil Engineering Ltd

Email :
Phone : +44 (0)1792 301818
Website :

Diving Operations 

Kaymac it has always been our practice to directly employ all our fully qualified commercial divers. It has also been our policy to ensure that all our divers possess, as well as their diving qualifications, a complementary construction skill. Therefore we have qualified stonemasons, carpenters, coded welders and other trades available at our disposal. Outfall Pipeline Inspection, Repair & Installation 

A major part of the services that Kaymac provide for the water industry is the inspection, including detailed diving inspections, where required, detailed reporting of the condition of a structure, and a full range of engineering solutions for each individual circumstance. 

These include: unblocking of outfalls, repairs to existing outfalls, extension of existing outfalls and installation of new outfalls in a range of construction materials from HPDE, Concrete, Cast Iron, Ductile Iron, among others. Infrastructure Services Kaymac are presently working for Black and Veatch on behalf of client, Welsh Water at Prioress Mill, Usk, in Gwent.

Kaymac's role is in providing structures to provide protection from harm to fish species in river intakes using improved screening methods while also removing existing screens and installing trash screens. 

Also, Kaymac will be demolishing sections of the existing wing walls and constructing new splayed walls to support new 'Hydrolox' screens. Another aspect of this scheme that will be carried out by Kaymac is the reinstatement of the existing river bank, providing reinforcement to both upstream and downstream areas by means of riprap and gabion baskets, providing a tapered installation between the natural bank and the new structure in order to minimise water turbulence.

For further information contact Jeff Lippiett on +44 (0)1792 301818 or visit

Keel Marine Limited

Email :
Phone : 01730 268889
Website :


Keel Marine is a long established International Maritime Consultancy with experienced Naval Architects, Marine Engineers and Surveyors able to undertake all types of Marine Design, Survey and Supervision along with the provision of expert independent advice. Keel Marine offers services in Ship and Boat Design, Marine Survey, Vessel Stability and Project Management as well as Supervision of Ship Building, Repair, Conversion and Life Extension Programs.


Established in 1962 Keel Marine provides Naval Architecture and Marine Engineering Services worldwide to an impressive range of commercial and government entities.  Its reputation for excellence and high standard delivery across a diverse range of marine and offshore engineering ensures our clients return time and again.

Keel Marine’s skilled personnel include Naval Architects, Marine Engineers, Marine Surveyors and the support services needed to provide our clients with a comprehensive design, engineering and project management service covering most types of vessel in the marine and offshore industries along with comprehensive consultancy services to Government and non-government organisations worldwide.


Keltbray Group

Email :
Phone : +44 (0)20 7643 1000
Website :

Keltbray Group is a UK leading specialist business, which offers engineering, construction, demolition, decommissioning, remediation, rail, environmental services and reinforced concrete structure solutions & Sheet piling services.

The company is a key player in developing and maintaining Britain’s built environment and operates in highly regulated environments; making sites ready for new infrastructure and developments.

With the goal of being best in class, customers trust in Keltbray to deliver projects safely, on time and budget, and with care for the environment and our communities. From being founded as a smaller earth and groundworks company in 1976, the company has over the past four decades grown to become a £300 million Group of companies that provide specialist services and is unrivalled in the UK.

For further information contact us on +44(0)20 7643 1000 or visit

Lagan Specialist Group Limited

Email :
Phone : +44 (0) 28 9045 5531
Website :


Lagan Construction


Delivering innovative civil engineering and building solutions for roads, airports, water, energy, marine and building industries.


At Lagan Specialist Group we consistently deliver outstanding quality of service in every market where we work,


Our divisional teams have expertise in a range of sectors where we undertake infrastructure, capital and maintenance projects through a variety of procurement routes.

Our specialist teams have proven expertise and experience in delivering projects across a range of sectors including roads, airports, water, energy, marine and rail.

We are proud of our success and of our people whose skills, dedication and expertise have achieved award winning recognition from a number of leading industry bodies.


Land & Marine Fabrication Services Ltd

Email :
Phone : 07720600806
Website :

 Land & Marine Fabrication Services Ltd is a newly formed company offering a very reliable and high quality service to all customers, regardless of the amount of work required. Over 20 years of experience designing, fabricating and supplying various bespoke items for the oil and gas industry and working closely with all relevant certifying authorities such as DNV, Lloyds Register, Bureau Veritas and ABS as well as providing services for the on-Shore industries.

LiftEx 2019

Email :
Phone : +44 20 3488 2865
Website :

LiftEx is the flagship event of LEEA (Lifting Equipment Engineers Association), the leading global representative body for all those involved in the lifting industry Worldwide.The event inspires, educates and unites the industry through educational and technical sessions, presentations on innovation, a packed exhibition floor over 2 days.Attendees will join their peers and potential suppliers and customers industry professionals from a wide range of vertical markets, including rail, construction, renewable energy, civil engineering, entertainment, road & maritime transport, health & safety, utilities and manufacturing.


Event date: 13th & 14th November 2019
Event location: Marshall Arena, Milton Keynes, Stadium Way, Milton Keynes, MK1 1ST

Macduff Ship Designs Ltd

Email :
Phone : +44 (0)1261 833 825
Website :

Macduff Ship Design Ltd has risen and expanded steadily to become one of the most prolific naval architect and marine consultancies in the commercial and fishing vessel sectors. Its 6m to 50m designs are seen across the world in numerous forms; work boats, tugs, fishing vessels, ferries, pilot boats, patrol boats, dredgers, research vessels and multipurpose vessels.    

Macduff Ship Design is a company that specialises in providing bespoke, carefully tailored designs.  

At Macduff Ship Design Ltd, we offer a comprehensive range of professional and technical Naval Architecture and Consultancy services to the commercial marine and fishing industries.  

For further information contact Ian Ellis on +44 (0)1261 833 825 or visit

Mackinnons Solicitors

Email :
Phone : +44 (0) 1224 632 464
Website :

Established for over 175 years, Mackinnons has always been associated with marine law. 

Our worldwide scope and progressive outlook has allowed our involvement with the offshore, shipping and commercial community to increase over the last 30 years to the extent that the majority of our partners spend most of their time engaged in sea related or commercial legal work. 

In addition to our marine and commercial teams, we boast exclusive property law and personal advicetax and estate planning departments, providing our individual clients with unparalleled levels of service, complemented by the team’s sensitive touch and acute legal and financial awareness.

For further information contact Caroline Cumming on +44 (0)1224 632 464 or visit

Marine Ecological Surveys Ltd

Email :
Phone : 01225 442211
Website :

Marine Ecological Surveys Ltd was established in 1975 with the express aim of providing authoritative scientific advice on the impacts of major industrial and construction developments in the marine environment.

Since that time our business has developed to meet the diverse needs of our clients in the face of increasing legislative pressures of working in the marine environment. In 2007 MESL benefitted from becoming part of The Gardline Group, a multi-disciplinary organisation involved in satellite communications, security, ship building, dry dock engineering, digital mapping and vessel charters.

As an organisation MESL has specialist expertise in the design and implementation of monitoring programmes, the provision of EIAs and Environmental Statements, and primary research. With our in-house laboratories and expert staff MESL are renowned for conducting benthic, epibenthic and fisheries studies in a range of marine habitats. Our expertise also includes spatial analysis and mapping using GIS and the latest 4-D visualisation technologies. We routinely prepare high quality fully interactive electronic reports to meet the needs of our clients.

Our reputation has been established through the provision of professional consultancy services to a range of clients in the private and public sectors. Our client base includes prestigious companies from a number of different industries including aggregates, chemicals, leisure and tourism and port and harbour development. We also provide technical and marine policy advice to government departments and agencies such as Defra, Cefas, Natural England and the JNCC.

For further information please contact Daniel Brutto on 01225 442211 or visit

Medway Diving Contractors Ltd

Email :
Phone : +44 (0) 1634 829 818
Website :


One of the oldest established commercial diving companies in the UK. Established in 1970 as an inshore/inland diving company. Our operations are carried out both nationwide and internationally.

The company is based in Rochester, Kent in the UK. Our depot is located in Chatham Dockyard on the River Medway.

Our dive teams can be supplied with mobile vans to transport dive systems to any site in the UK. In addition these dive systems can be unmounted and loaded aboard vessels for use.

We are registered with the HSE as an inshore/inland diving contractor. The firm has never been issued with a HSE improvement or prohibition notice.

We are a full member of the Association of Diving Contractors. All of our supervisor divers must complete the ADC supervisors examination.

Lloyds Register approve us as a contractor for in water shipping surveys and repairs.

For further details contact Peter Hutchinson   on +44 (0) 1634 829 818  or visit  www.medwaydiving

ML Dredging Ltd

Email :
Phone : 02392824210
Website :


Dredging Contractors Portsmouth. Here at ML DREDGING we are a family run business based in Portsmouth. We specialise in capital and maintenance dredging for all aspects of the marine industry. We also provide a bespoke charter service for all of our vessels and equipment. 

We have a large range of vessels including road transportable cutter suction dredgers, modular dredging pontoons, versatile adapted backhoe dredgers and even a small dredging platform, perfect for inland waterways or locked marinas. Working in tandem with these dredgers we have self-propelled split hopper barges ranging in capacity from 60m3 up to 460m3. 

We strive to adapt our equipment to suit the diverse requirements of our customers. With an extensive heavy engineering background and our own fabrication workshop based in Portsmouth, it is easy for us to adapt our vessels and equipment to suit any needs of the dredging industry including the dredging of drop docks with extended  equipment for removal of silt from under pontoons or walkways. 

We incorporate a range of services in marine consultancy including pre and post dredge surveys, volume calculations, dredge profiles, risk assessments best methods or even just a friendly chat as well as licensing and project management.

For further information contact Joe Liney on 02392 824210 or visit


Modal Training Ltd

Email :
Phone : 01472 311222
Website :

 Modal Training is an innovative and market leading new £7 million training centre built to support the ports, energy and logistics sectors. Situated in the port town of Immingham, along the M180 corridor, the centre is equipped with state-of-the-art training facilities for ROAD, OFFSHORE, WIND ENERGY, MARINE SIMULATION, CRANE SIMULATION, PORTS and MARITIME

NewWaves Solutions Ltd

Email :
Phone : +44 207 531 1904
Website :

NewWaves Solutions Ltd is a British dredging, environmental and marine engineering solutions provider active throughout the UK & Ireland. 

NewWaves Solutions is part of the Belgian DEME Group, which has been carrying out dredging, land reclamation, marine contracting and hydraulic engineering projects worldwide for more than 140 years.  

More recently it has established itself as a leading supplier of marine and engineering services in the offshore energy industry. 

By combining the strength of the Group’s operating companies (DEME Offshore, DEC, DBM, DBE, DIMCO) under one roof, NewWaves Solutions is able to provide a single point of contact for UK-based projects. 

Innovation is in our DNA. We are continuously developing and implementing new techniques, as well as investing in state-of-the-art vessels and equipment, to best deliver our services. 

NewWaves Solutions is a full EPCI contractor able to take on the most complex and challenging project. It has a wide-ranging portfolio delivered into its key markets as shown below: 

Dredging & Land Reclamation  

Marine & Offshore Solutions - DEME Offshore  

Fluvial & Marine Aggregates - DBM Division 

Environmental Solutions - DEC Division 

Marine Infrastructure Solutions - DIMCO Division


For further information contact Will Shields General Manager on +44 (0)7780 335925 or visit


Norwest Marine Ltd

Email :
Phone : +44 151 207 2860
Website :

Based in the historic maritime city of Liverpool, Norwest Marine have over 30 years experience in the marine industry. We are the main UK agents for Seasafe liferafts and for the sale and distribution of Thanner hydrostatic release units. Norwest Marine have an MCA approved station and have an extensive range of life rafts available from 4 Man up to 150 Man. All of our equipment is certified by the relevant authorities responsible for maritime safety and carries a full manufacturer warranty. For further details contact Dave Adams on Tel: 0151 2072 860 email or visit

Ocean Kinetics Ltd

Email :
Phone : +44 1595 696777
Website :

Ocean Kinetics Ltd was founded established in 1992 by John Henderson it became a limited company in 1998 We have grown to become a dynamic multidisciplined company with extensive experience in fabrication welding engineering marine works project management for the Oil Gas Utilities Renewable industries as well as Ports Harbours Working from our main offices workshops in Lerwick we are ideally placed to carry out works

Offshore Marine Limited

Email :
Phone : +44 (0) 203 457 5836 / +44 (0) 7802 726766
Website :

Offshore Marine Limited provides a comprehensive range of cost-efficient, high-quality product solutions to the oil and gas, renewable, fishing, and merchant vessels sectors with both standard and customised equipment design. We also provide reliable support services for cranes, launch and recovery systems, and winches to a range of clients around the world. Our equipment can be certified by a number of class societies.

Combining excellent products, strong client focus and a highly competent service, Offshore Marine provides a leading service for the global market. Offshore Marine brings a wealth of knowledge and experience to the supply, engineering, servicing and maintenance of marine top deck equipment, as well as related training. Our team has more than 50 years of industry experience in the marine, renewable, offshore and oil and gas sectors. Our managers and engineers are involved at every stage from enquiry through to design, engineering, delivery, training, installation, and testing.

We plan, engineer and deliver equipment for all types of vessels and installations, creating the most effective and efficient solutions for our clients. Our equipment is built to the latest codes (DIN15018 / EN13001 (shipboard use) and EN13852 (offshore use)) and can be certified by all of the leading classification societies, including Lloyds BV, RINA etc. For extreme environments, all electrical components can be ATEX approved.

Offshore Marine is clients’ “one stop shop” for the worldwide supply of cranes, lifesaving davit systems and deck machinery packages along with the related engineering, training and service support

Orkney Island Council Harbour Authority

Email :
Phone : +44 (0) 1856 873 636
Website :

Orkney Islands Council Division of Marine Services as the Competent Harbour Authority (CHA) which incorporates the Harbour Authority, Orkney Towage and Orkney Ferries is responsible for the safe and efficient operation of the 29 piers and harbours located throughout the Orkney Islands. It is the UK number cruise port call, handles 10% of the UK’s oil through Flotta Oil Terminal and increasing numbers of STS operations in Scapa Flow which is the largest natural harbour in Europe.  

Orkney is at the forefront of UK in Marine Renewables and energy decarbonisation.

For further information contact Paul Olvhoj on +44 (0)1856 873636 or visit


Penzance Drydock

Email :
Phone : +44(0)1736 363838
Website :

 Refit, repair conversion and class-approved testing for vessels up to 75m

Since 1834, the marine engineers at Europe’s oldest dry dock have been known for their outstanding attention to detail, good humour and sound, down-to-earth advice. Perfectly located at the UK’s south western tip, Penzance Dry Dock is fully equipped for all kinds of marine engineering, with an experienced team and skilled contractors on hand.
Engineering works that stand up to time, use and the elements
It’s not only aboard ship where a knack for sturdy, corrosion-resistant engineering comes in useful. From structural steelwork to seafront railings, you’ll find our handiwork wherever something’s built to take a beating, and last. All our work is carried out to ISO9001 standards, by experienced engineers, in our fully-equipped engineering workshop.
For Further Information Please Contact Amber Davey on +44(0)1736 363838 or visit

Rock Fall Company Limited

Email :
Phone : +44 (0)1563 851302
Website :

Rock Fall are Marine Drilling and Rock pre-treatment specialists.

The work that Rock Fall undertakes is normally associated with harbour deepening, quay wall construction and the clearance of navigational channels.
Foreshore trenching is another important application for the company's underwater expertise.
Drilling and blasting work is also carried out in other areas, such as pipeline trenching on land, rock anchoring /grouting, pre-treatment of rock prior to piling and in support of general civil engineering.

RPS Bedford

Email :
Phone : 01462 480400
Website :


RPS has been providing marine analysis services for over 10 years and takes part in the Quasimeme Marine Performance Testing Scheme in line with OSPAR guidelines. RPS holds UKAS accreditation for marine sediment analysis in line with the MMO requirements. All data supplied by RPS for marine licence applications is backed up by CRM and IRM quality data which is provided to all clients.


RPS Analytical Services core expertise remains the analysis trace and ultra-trace analysis of a vast range of chemicals and contaminants in sediment, water this is achieved using state of the art instrumentation such as ICP/MS, LC-MS/MS and GC-MS/MS. RPS can offer ultra-low limits of detection using UKAS accredited methods and guidelines as described above.

Saacke Combustion Services Ltd

Email :
Phone : +44 (0)23 92 333900
Website :

SAACKE have been involved in firing technology for more than 80 years and are today one of the world leaders in this field. As specialists we plan, develop and produce burners and system solutions for Marine and Industrial thermal processes.

Our products and services are represented on ships and offshore installations as well as industry.

 SAACKE on board. That means reliable, environmentally friendly and energy-efficient combustion plants for sea-going vessels, offshore plants and LNG tankers. The vast experience in the development, design and construction of new plants and conversion of existing plants pays off here.

SAACKE offers in-depth expertise and efficient order handling from a single source. Each individual combustion plant not only ensures high availability, but also meets the strictest environmental standards. That holds true for standard configurations and for plants with individual and tailored systems. A few examples: 

·         Gas combustion unit (GCU)

·         Composite marine boiler (CMB)

·         Fired marine water heater (FMW)

·         Fired marine boiler (FMB)

Of particular note here is the FMB-VF-LONOX fired marine boiler. This extremely low-emission boiler is built for the limited space available on board and also meets the strictest emission standards on land.

For conversions of existing plants, customers can count on the know-how, the personal consultation and customized solutions from SAACKE. Experienced teams carry out a detailed assessment of the plant environment before the start of the engineering work. It forms the basis for balanced dimensioning of all the components. Standard components or plants are integrated into the existing system or – if necessary – alternative possibilities are developed.

Engineering, construction, manufacturing, support and service of marine systems are in the best hands at SAACKE, thanks to comprehensive know-how for standard applications and individual projects. Our customers appreciate not only the extreme reliability and very high availability of all the components, but also the outstanding efficiency and eco-friendly operation. And that over the renowned long service life.  


For further information please contact Stuart Rielly on +44 (0) 23 9233 3900 or visit



Saacke Combustion Services Ltd

Email :
Phone : +44 (0) 23 9233 3900
Website :

SAACKE have been involved in firing technology for more than 80 years and are today one of the world leaders in this field. As specialists we plan, develop and produce burners and system solutions for Marine and Industrial thermal processes.  Our products and services are represented on ships and offshore installations as well as industry.

SAACKE on board. That means reliable, environmentally friendly and energy-efficient combustion plants for sea-going vessels, offshore plants and LNG tankers. The vast experience in the development, design and construction of new plants and conversion of existing plants pays off here.  SAACKE offers in-depth expertise and efficient order handling from a single source. Each individual combustion plant not only ensures high availability, but also meets the strictest environmental standards. That holds true for standard configurations and for plants with individual and tailored systems. A few examples: 

·       Gas combustion unit (GCU)

·       Composite marine boiler (CMB)

·       Fired marine water heater (FMW)

·       Fired marine boiler (FMB)

Of particular note here is the FMB-VF-LONOX fired marine boiler. This extremely low-emission boiler is built for the limited space available on board and meets the strictest emission standards on land.  For conversions of existing plants, customers can count on the know-how, the personal consultation and customized solutions from SAACKE. Experienced teams carry out a detailed assessment of the plant environment before the start of the engineering work. It forms the basis for balanced dimensioning of all the components. Standard components or plants are integrated into the existing system or – if necessary – alternative possibilities are developed.  Engineering, construction, manufacturing, support and service of marine systems are in the best hands at SAACKE, thanks to comprehensive know-how for standard applications and individual projects. Our customers appreciate not only the extreme reliability and very high availability of all the components, but also the outstanding efficiency and eco-friendly operation. And that over the renowned long service life.


For further information please contact Stuart Rielly on +44 (0) 23 9233 3900 or visit

Scania (Great Britain) Ltd

Email :
Phone : +44 (0)1908 210 210
Website :

Scania is one of the world’s leading manufacturers of 

trucks, buses, industrial and marine engines with an 

excellent reputation and highly loyal customers. 

Scania`s six- and eight-cylinder marine engines, ranging 

from 294 kW to 735 kW are the most popular Scania marine 

solution, featuring an array of flexible options regarding 

ratings, equipment, transmissions and instrumentation. 

Every year Scania builds more than 80,000 engines on it 

modular five-, six- and eight-cylinder platform. Scania 

engines are found operating in many different conditions 

around world in truck, bus, industrial, marine and power 

generation applications. 

For further details contact Paul Cowell or  David Bamber 

Telephone : 01908 210210 or visit 

TELEPHONE +44(0) 1908 210210

SEM Energy

Email :
Phone : +44 (0)1224 900122
Website :

SEM Energy Ltd (SEM) is an environmentally conscious sustainability partner in waste and effluent water treatment. We avidly embrace and pioneer disruptive leading-edge technologies that process co-products from ‘waste’ streams and deliver innovative water treatment solutions whilst driving end user operational efficiencies and to create added value. 

We deliver port side solutions in waste reduction and water treatment to process ballast, industrial and washdown water to enable re-use or safe discharge of water. As a result, shrinking the costs and resources associated with collection, handling, storage and disposal. Our engineered solutions range from site surveys, design optimisation, solution provision and system upgrades and modifications. 

To enhance the SEM offering, our pioneering approach in combination with our strategic partner’s Proteus Multi-parameter water quality instrument, we offer the only scientifically patented technology in the world for measuring live BOD (Biochemical Oxygen Demand). This allows for real time monitoring, improved accuracy and cost efficiency, as opposed to traditional, 5 day tests and unreliable methods of BOD measurement. 

The unique multi parameter water quality instrument can also measure a wide variety of parameters including: BOD (mg/l), COD (mg/l), Total Coliforms, Turbidity (NTU), pH, Temperature (ºC) and Conductivity (µS/cm) to name a few. The real time collection, analysis and reporting of the data allows for immediate and better, decisions to be made based on accurate data to ensure compliance and production efficiencies. An added benefit of the technology that it promotes un-manned operation which limits HSE risk to personnel.  

We know that the Ports and Harbours sector has played a critical role in the development of infrastructure and economic growth over the centuries and we want to keep it this way. Therefore, ensuring time spent at quayside is optimised for authorities, vessel owners and service providers. 

Everyone at SEM is working with purpose, towards an ideal. Individually and collectively we know we can make a positive impact on our future. This drives us to the next innovation and the next solution. 

Get in touch to see how we can help.

For further information please contact our technical sales team on +44(0)1224 900122, or visit



Siemens Industry Automation and Drive Technologies.

Email :
Phone : +44 161 446 5884
Website :

Providers of all Siemens related marine spares electrical equipment, including Siemens shaft generator control hardware, low voltage, PLC equipment, system repairs and engineer call-outs.


Email :
Phone : +44 (0) 191 234 8675
Website :

SMD is one of the world's leading manufacturers of remote intervention equipment, operating in hazardous environments worldwide.

The business has a strong heritage in subsea engineering, going back to the 1970s when it pioneered the design and manufacture of seabed ploughs. Following the acquisition of Hydrovision in 2003, SMD has grown to be the world's number one independent designer and manufacturer of workclass and specialist subsea remotely operated vehicles (ROVs). SMD underwent a management buy-out in 2008, funded by the private equity group, Inflexion. It is headquartered near Newcastle in the UK, with additional facilities in Malton (UK), Houston, Singapore and Macaé in Brazil.
SMD is organised along five key business streams: ROVs, Trenching, Mining, Renewables, and Nuclear. These business streams are each led by a dedicated business stream manager reporting into one of the two joint managing directors.
For further details contact Victoria Bosi  on  +44 (0) 1912348675 visit

SMS (Specialised Marine Support) Ltd

Email :
Phone : 01852 300589
Website :

Specialised Marine Support Ltd (SMS) is an ISO 9001:2008 accredited and Achilles FPAL registered company based in Scotland providing support vessels to the offshore renewables and offshore construction industries throughout Europe. All vessels are road transportable.

We can supply: 

11-14m Cabin RIBS

10m Open RIBS 

10m Fast Landing Craft 

Evolution 38

For further details contact Iain Hill on +44 (0)1852 300 341 or visit

Spie WHS

Email :
Phone : +44 (0)1642 769085
Website :

 Spie Limited is a specialist electrical and instrumentation services provider within the industrial market. Its markets include power generation, onshore and offshore oil and gas and specialist manufacturing. It has a long established culture and core engineering skills. SPIE supports and brings innovative solutions to local authorities and businesses to design, build, operate and maintain their facilities.

For further information please contact Steve Craddock on +44 (0)1642769085 or visit

Sub Aqua Diving Services (UK) Ltd

Email :
Phone : 01642 230209
Website :

 Sub Aqua Diving Services (UK) Ltd (SADS) were established in 1975. For over 35 years we have been carrying out diving operations all over the UK, mainly in the North East. Our clients have varied, our ethos has not! We have completed projects SAFELY, EFFICIENTLY & WITHOUT INCIDENT for a host of different clients including marine civil engineering, Port and Water authorities, Goverment agencies, Nuclear power installations and renewable offshore wind farms.

SADS can provide our clients with diving and engineering support for any project, be it a small, one day, one dive operation, to a complete state of the art IMCA dive spread. Sub Aqua Diving Services (UK) Ltd have the answer to any and all sub-sea endeavours.
For further details contact  Paul on Telephone 01642 23020901642 230209  or email:

Sulzer Chemtech (UK) Ltd

Email :
Phone : +44 (0)1642 873520
Website :


Sulzer Chemtech tower field service (TFS) is a global leader providing maintenance of columns and vessels, including tray and packing installation. Sulzer can provide inspection and revamping of all process equipment.

Years of successful tower and vessel experience assures our customers of a partner who can work in a safely, is cost effective and technically experienced.

This experience obtained by our teams assures Sulzer Tower Field Service can provide a specialised service that will minimise downtime for both planned and unplanned shutdowns/Turnaround events.

Sulzer Chemtech Ltd is an acknowledged leader in the field of mass transfer and separation technology with a broad product range including structured packing, trays, random packings, mist eliminators, coalesces and associated process internals. From rapid delivery of spare components to complete engineering support of column design, Sulzer Chemtech draw on a wealth of experience to provide reliable support for turnaround and revamp projects.

For further details visit

Or contact Paul Saunders +44(0)1642873520

ThyssenKrupp Rothe Erde UK Ltd

Email :
Phone : +44(0)191 5185600
Website :

Located in Peterlee, Co Durham, ThyssenKrupp Rothe Erde company is a member of the ThyssenKrupp organisation. 

Manufacturing slewing bearings of diameters of up to 2100 mm, including both ball and roller bearings. Wire race bearings are also manufactured and supplied for various applications. Other product ranges include the supply of seamless rolled steel and non-ferrous rings, turntables and structural elements. 

ThyssenKrupp slewing bearings have been for decades developed and researched by state-of-the-art technology for customers worldwide in a variety of applications. 

Advanced calculation techniques such as Finite Element Analysis, guarantees economical and safe dimensions of load transmitting elements and of components where deformation is a critical factor. 

The competent consultation with our customers, the high quality of the products and the innovative further development of the technology in the Research & Development centre at our Lippstadt, Germany works are the foundation to actively take on the challenges proposed by our international markets.

With our Headquarters & main manufacturing plants in Dortmund and Lippstadt, Germany we also have other manufacturing subsidiaries in USA, Brazil, Spain, Italy, France, Japan, China and shortly India. In addition to the above we have sales agencies in all major Industrial countries giving ThyssenKrupp Rothe Erde a worldwide market presence much to our customer's advantage.

For further information contact Andrew Streatfield on +44(0)191 5188600 or visit


TMS Maritime (Teignmouth Marine Services) Ltd

Email :
Phone : +44(0)1626 866066
Website :

Our mission is to provide customers with comprehensive, value engineering services, which match their needs and expectations.

TMS has been providing professional marine and land based civil engineering services since 1991. We take the time to learn what is important to our customers and then gear our work so that our customers’ expectations are fully met. We are greatly experienced in working as the Principal Marine Contractor, where we are able to provide a full, one-stop-shop construction service. We can also provide design services as well using our design partners for a full turn-key project. TMS are also fully able to work as a sub-contractor for large civil engineering and building companies, who approach TMS for marine expertise and the use of our specialist marine and land-based plant.






Uplands Engineering Limited

Email :
Phone : 01227 751033
Website :

Marine and Industrial engineering specialists with a positive ‘can do’ attitude offering a genuine 24/7 worldwide service Providing comprehensive & effective engineering solutions to our customers minimising downtime & disruptions to their business Our core skills are constantly updated to maintain, develop & exceed our current high standard, allowing us to provide safe, reliable & high quality services.Combined our modern workshops offer over 18,000sq ft of covered space complete with overhead crane facilities. This allows us to fabricate up to 10tonnes inside & unlimited on quayside (Chatham Docks).The larger of our 2 workshops our Faversham base offers the following facilities;

Fabrication Shop

Comprehensive fabrication shop, (over 5000sq ft) capable of batch & bespoke fabrication in most materials inclusive of mild and heavy steel, stainless steel & aluminium

Structural Steel Fabrication

All our Engineers are time served and highly skilled offering a wide range of skill sets in the following disciplines:

Marine Diesel Specialists – Overhaul & Refurbishment

Mechanical Engineering

Coded Welding

Pipe Fitting in all Materials

Electrical Engineering – Marine Specialists


Sheet Metal Fabrication

Health & Safety Advisor

Project Management

Apprenticeship Scheme

Training / Apprenticeship Scheme

As a company we believe strongly in the investment of our staff, we offer a wide and varied training scheme for existing staff. Keeping all disciplines up to date and continually looking to expand our skill base.

Further it is our belief that we should invest strongly in the future of the industry, we therefore offer an extensive apprenticeship scheme in all our major disciplines. Currently in our employment we have;

3 x Mechanical Engineer Apprentices

2 x Welder / Fabricator Apprentices

1 x Electrical Apprentice

For further information contact Steve Hitch on 01227 751033 or visit



WPH Marine Construction

Email :
Phone : +44 (0) 1795 422764
Website :


WPH have over 40 years experience of large and small projects in the field of Marine Construction, Demolition & Plant Hire and is fully compliant with Health and Safety requirements.


We are ISO 9001 registered and the winners of two prestigious Institute of Civil Engineers awards.


All our craft are Port of London Authority registered

The company is a PLA registered and approved contractor.


For further details visit or 

Contact Ian Bone on +44 (0) 1795 422764

Wärtsilä UK Ltd

Email :
Phone : 01224 871166
Website :

Wartsila services UK have the widest offering in the market whichcovers installations from spare parts, maintenance and technical support to upgrade & retrofit and full service agreements for the marine, offshore and industrial markets.

Wartsila Engine services provide complete engine related system services, covering both Wärtsilä and other engine makes in house or on site with a qualified team of engineers ready to be deployed, covering all requirements on land, in port and at sea. Both Aberdeen and Segensworth workshops have fuel injection facilities that can offer service and overhaul on all types of fuel injectors and fuel pumps

Wärtsilä Automation Services in Montrose are equipped to offer a complete electrical package including conceptual design, engineering, assembly, installation and commissioning of retrofit systems and fully recognise the importance of on-site support and application engineering.  Wartsila Automation are also proud to be the Authorised Service Centre and Agent for Basler Electric Company who are world leaders in power control and protection. Basler trained commissioning engineers are available to troubleshoot and commission AVR systems.Wärtsilä Propulsion Services UK, range from in-situ machining, straightening propeller shafts and rudder stocks, repair, retrofit and rebuilding as well as environmental solutions for metallurgical repairs of both propellers and shaft seals. Work is carried out in the fully equipped repair facility in Glasgow or on site anywhere in the world. Wartsila propulsion UK have a full team of highly qualified and professional service engineers who attend dry dockings to supervise and carry out hub overhauls, thrusters repairs and control set ups.

Our service businesses support all customers throughout the lifecycle of their installation.